Rotary Machines

• The Elite Wireless Battery Pen is a system designed for easy tattooing.
• Will keep working for around 5 hours, depending on usage.
• The voltage, battery level and usage time is shown on the LED display.
• The voltage can be adjusted through the buttons (+) and (-) with a change of 0.1V on each press.
• Powered by a Japanese Motor.
• Recharging Time: 2 hours.
• Output Voltage: 5-12V.
• Battery Capacity: 2000mAh.
• Stroke: 3.5mm.
• Needle Protrusion: 0-4.5mm.
• Includes Wireless Battery Pen, 4 Pen Grips and a USB charging cable.

FK Irons listened to you and created a revolutionary device that puts, you, the tattoo artist, in control of your art. The first truly wireless tattoo machine is here – the Spektra Flux. More power without any of the complicated stuff. Just a pen-style device with all the features you need.

FK Irons have created a Bluetooth enabled device with up to 10 hours of battery life with a fast charging speed of about 1.5 hours. Charge your tattoo machine from any USB-C power plug including your car, laptop, or battery pack. Know where you stand at all times and check your battery life and your voltage usage through an LED indicator. To not over complicate things, they created a user-friendly interface with only 3 buttons so you can spend more time in your art. Prioritising your comfort and safety with a lightweight, ergonomic design that packs most of the weight in the centre, reducing the strain in your arm.

It’s time to unleash your power, embrace the wireless revolution and create your masterpiece. Say goodbye to your annoying cables, rotary, coil machine - even if you’re loyal to the coil, you’ll love the Flux.

• Direct Drive: 4mm Stroke to line and pack colour better
• Lightweight Design: Only 6.3 ounces (178 grams), most of the weight is in the centre
• Dynamic Power Path Management: Always get the same amount of power
• LED Indicator: From here you can check your battery life, pair with devices via Bluetooth, and change voltage
• Changing Voltage: Decrease and increase voltage by half increments
• Detachable battery: Switch to the auxiliary PowerBolt battery.
• Battery life:  Up to 10 hours of life with only 1.5 hours of charging time
• USB-C port: Charge your wireless tattoo machine in your car, laptop, or from a battery pack
• Bluetooth capability: Pair with Darklab app
• Darklab App : Change voltage through voice, access tattoo time and receive firmware updates
• Compatible with most membrane needles
• Voltage : 5-12 Volts
• Grip: 33mm
• Handcrafted in the USA
• These PowerBolts are not compatible with the Killswitch footswitch

Important: Please be aware that all warranty issues are handled exclusively by Axys and this may require that the machine be returned by the buyer to Axys in the US. For information about this process see the Axys contact and repair page
Every Axys Machine is warrantied for 1 year after the date of its sale. Warranty covers any mechanical failure due to manufacturing defects.

All those times you had to set up multiple machines…
All those times you had only one, but you worked hard to make it work anyway.
Those times are behind you now, because the Axys Valhalla does everything that every machine before it ever could, without tools or needing to stop mid-tattoo to make adjustments. It’s the first machine in the world to offer this kind of power.

This isn’t just another pen with a spinning grip. You not only adjust needle protrusion with the Valhalla’s grip, but the stroke options allow you to choose your hit. Whatever you need to do: lining, packing, coloring, blending, shading, its all there at your fingertips, 5 strokes in 1.

• 2.5mm
• 2.9mm
• 3.4mm
• 3.8mm
• 4.2mm

Features and Specs:

• Driven by a 10 watt, high-torque, Swiss made, Maxon precision motor.
• Fully American manufactured and assembled.
• Constructed of 6061-T6 aluminium, finished in Mil Spec Type II anodizing.
• American made Main Bearing.
• 5 strokes in one machine, changeable on the fly.
• Primary range of 5 volts to 14 volts (motor will start and run down to 3v).
• Lubricated for life.
• No need for maintenance.
• Uses RCA connection (**does not come with cord**).

Microbeau is introducing something exciting to the cosmetic tattooing community! Ahead of the curve, they pushed the boundaries of technology to bring to market the cordless Flux S permanent makeup machine. Count on Microbeau’s quest for innovative, reliable machines designed by PMU technicians.

The Flux S interchangeable battery lasts up to 12 hours and charges with a regular USB-C cord. Optimised for PMU artists’ needs, it is elegantly designed, manageable and lightweight for an ease of use that will unleash your abilities to a whole new level of beauty.

Soon you’ll be able to control the voltage using voice commands through new features on the Darklab app, which you can download for free on your cellphone. Other updates will increase your business efficiency, as well as helping avoid cross-contamination.

• No cord, no power supply = less cross-contamination
• Very easy setup
• Switch sides effortlessly while working
• New generation of brushless motors means it’s lightweight: Only 6 ounces (170 grams)
• Dynamic Power Path Management: Consistent power for more accurate work
• Direct drive optimised for PMU: 3 mm stroke
• Most of the weight is in the centre
• User-friendly, colour-coded voltage display
• Decrease and increase voltage by half increments
• Voltage from 5 – 12 Volts
• Detachable battery: Switch to the auxiliary battery. Save when you buy both at the same time.
• Battery life: 10 - 12 hours with only 1.5 hours of charging time
• USB-C port: Charge your device in your car, laptop or airport
• Bluetooth enabled: Pair with Darklab app
• Darklab app: Change voltage through voice, access tattoo time and receive firmware updates
• Compatible with most membrane needles
• Tapered grip: 28 mm
• Handcrafted in the USA
• These PowerBolts are not compatible with the Killswitch footswitch

After over three years of extensive research and development, Microbeau by FK Irons is proud to announce the highly anticipated release of the Spektra Xion S. This device is the first of its kind to have been designed, engineered and beta tested in cooperation with top, reputable artists from around the world. The collaboration enabled Microbeau by FK Irons to design a machine that caters to a broad scope of micropigmentation styles while giving the artist more control over the machine and their art.

Features:

• Comfortable, ergonomic and lightweight design (4.7oz / 134g) allows for optimal manoeuvrability.
• Convenient, interchangeable stroke suits different styles of micropigmentation.
• Secure ratcheting system enables artists to lock in needle depth settings.
• Seamless, autoclavable, grip is compatible with all needles.
• One turn give dial allows for adjustment of needle tension providing artists with more options and flexibility.
• Powerful 6W MotorBolt system is the first motor specifically designed to meet the demands of micropigmentation.
• Standard 2.5mm and alternate 1.8mm stroke.
• The Grip tapers from 26mm to 19mm.

• The first pen-style machine that gives artists full control of parameters to unleash their creative vision.
• Ergonomic and lightweight design for optimal manoeuvrability.
• Convenient interchangeable strokes to suit different styles of tattooing. 3.2mm and 3.7mm Stroke Wheels included with purchase.
• Made of aircraft grade aluminium, the fully assembled machine weighs only 5.36 ounces.
• Secure ratcheting system enables artists to lock-in needle depth settings.
• Seamless, adjustable Grip is compatible with all needles.
• The grip of the machine is autoclavable. Use only steam autoclaves at temperatures no higher than 270° Fahrenheit or 132.222° Celsius.
• Incremental, one turn Give Knob dial for hard to soft adjustment of needle strike.
• Powerful 6W MotorBolt system - the first motor specifically designed to meet the demands of tattooing.
• Compatible with most power supplies on the market, the Spektra Xion is an all-in-one tool solution for all your tattooing needs.
• Machine Body and MotorBolt can be wiped externally with cold sanitation products.
• Engineered and manufactured in the USA by FK Irons.

• Machine Weight: 197g
• Machine Dimensions: 142 x 32mm
• Motor: Customised Swiss motor
• Stroke: 3.5mm
• Speed: 10800rpm +/-10%
• Recharging Time: 2 hours
• Operating Voltage: 5-9V
• Battery Capacity: 1800mAh
• Needle Protrusion: 0-4.5mm
• Comes with two batteries
  

• Machine Weight: 196g with battery
• Machine Dimensions: 136 x 28mm
• Grip Sizes: 28mm, 32mm
• Motor: Customised Swiss motor
• Stroke: 3.5mm
• Speed: 9000rpm +/-10%
• Operating Voltage: 5-12V
• Battery Capacity: 1000mAh
• Needle Protrusion: 0-4.5mm
• Includes RCA female and male adapters, extra grip and battery charging cable

Important: Please be aware that all warranty issues are handled exclusively by Axys and this may require that the machine be returned by the buyer to Axys in the US. For information about this process see the Axys contact and repair page
Every Axys Machine is warrantied for 1 year after the date of its sale. Warranty covers any mechanical failure due to manufacturing defects.

All those times you had to set up multiple machines…
All those times you had only one, but you worked hard to make it work anyway.
Those times are behind you now, because the Axys Valhalla does everything that every machine before it ever could, without tools or needing to stop mid-tattoo to make adjustments. It’s the first machine in the world to offer this kind of power.

This isn’t just another pen with a spinning grip. You not only adjust needle protrusion with the Valhalla’s grip, but the stroke options allow you to choose your hit. Whatever you need to do: lining, packing, coloring, blending, shading, its all there at your fingertips, 5 strokes in 1.

• 2.5mm
• 2.9mm
• 3.4mm
• 3.8mm
• 4.2mm

Features and Specs:

• Driven by a 10 watt, high-torque, Swiss made, Maxon precision motor.
• Fully American manufactured and assembled.
• Constructed of 6061-T6 aluminium, finished in Mil Spec Type II anodizing.
• American made Main Bearing.
• 5 strokes in one machine, changeable on the fly.
• Primary range of 5 volts to 14 volts (motor will start and run down to 3v).
• Lubricated for life.
• No need for maintenance.
• Uses RCA connection (**does not come with cord**).

• Working Voltage: 5-12V
• Connection: RCA
• Net Weight: 1.5oz (43g)
• Size: 60 x 25 x 20mm
• Battery Capacity:1000mAh
• USB Charging cable included
  

• The first pen-style machine that gives artists full control of parameters to unleash their creative vision.
• Ergonomic and lightweight design for optimal manoeuvrability.
• Convenient interchangeable strokes to suit different styles of tattooing. 3.2mm and 3.7mm Stroke Wheels included with purchase.
• Made of aircraft grade aluminium, the fully assembled machine weighs only 5.36 ounces.
• Secure ratcheting system enables artists to lock-in needle depth settings.
• Seamless, adjustable Grip is compatible with all needles.
• The grip of the machine is autoclavable. Use only steam autoclaves at temperatures no higher than 270° Fahrenheit or 132.222° Celsius.
• Incremental, one turn Give Knob dial for hard to soft adjustment of needle strike.
• Powerful 6W MotorBolt system - the first motor specifically designed to meet the demands of tattooing.
• Compatible with most power supplies on the market, the Spektra Xion is an all-in-one tool solution for all your tattooing needs.
• Machine Body and MotorBolt can be wiped externally with cold sanitation products.
• Engineered and manufactured in the USA by FK Irons.

• Machine Weight: 197g with battery
• Machine Dimensions: 135 x 33mm
• Motor: EZ Customised External Rotor Brushless motor
• Stroke: 3.5mm
• Speed: 9000rpm +/-10%
• Recharging Time: 3.5 hours
• Run Time: Up to 450min
• Operating Voltage: 5-12V
• Battery Capacity: 1600mAh
• Needle Protrusion: 0-4.5mm
• Includes RCA female and male adapters, extra grip and USB-C battery charging cable

• Stroke Length: 3.5mm (Red) or 4.0mm (Green)
• Operation Voltage: 4-12
• Speed: 10400rpm
• Battery Capacity: 1800mAh
• Battery Life: 6-10 hours (depending on voltage and cartridges)
• Charging Time: 2-4 hours depends on USB-C charger and USB-C cord
• Dimensions: 33.5mm x 131mm
• Weight: 190g
• Includes USB-C charge cord

Special Editions - only available in 4.0mm stroke with 2 PowerBolts

The EXO is a modular tattoo machine whose core is the same impressively powerful motor as the Flux. From the factory in the USA, the EXO unit is fitted with an RCA module for use with a traditional power supply and RCA cable or the Hover to enable eGive.

The RCA module is completely detachable with a simple quarter-turn action and can be replaced with the PowerBolt battery pack to create a wireless option. This new “modular design,” frees the artist to nimbly choose between power sources, with the option to quickly switch between:

• RCA module with RCA cable and traditional power supply
• PowerBolt battery pack for up to 10 hours of wireless tattooing

For artists who want the Flux’s power and also be ready for anything - whether using a cable is the best option in the circumstances, or you want to go wireless - the EXO is the perfect choice.

The EXO’s ergonomic design includes a larger 40mm grip to help ensure your hand isn’t clenched and overly tense. It is forward weighted, aiding the artist with downward needle pressure.

The EXO is eGive ready through the RCA module, RCA cable and Hover, or wirelessly with the Powerbolt and the Darklab app.

• FK Irons' first modular machine
• Available in 4.0mm stroke only (non-interchangeable)
• 40mm ergonomic wide grip
• Forward weighted, aiding the artist with downward needle pressure
• Powerful, 9-watt brushless motor
• Reverse polarity protection in the RCA module for motor safety
• Wired or wireless (with the Powerbolt set) options for the artist
• Ideal for lining, color packing, and solid color works
• Less passes to saturate ink, reducing skin trauma
• Weighs only 6.8 ounces, 189 grams
• eGive ready, via Hover and RCA cable or wireless Powerbolt and Darklab app
• Compatible with most standard membrane cartridges
• Note: USB-C cable included, charge plug has USA pins

Important: Please be aware that all warranty issues are handled exclusively by FK Irons and this may require that the machine be returned by the buyer to FK Irons in the US. For information about this process see the FK Irons repairs page
All FK Irons machines come with a one-year manufacturer's warranty from the date of purchase. This warranty covers any manufacturer's defect. Proof of purchase is required to claim warranty.

Microbeau International is proud to introduce the Bellar. Expertly designed in conjunction with artists and engineers to create the perfect synergy of form and functionality.
Crafted from medical grade components, and assembled and tested one at a time by our expert in-house technicians to ensure flawless performance.
Its slim and light design, weighing only 2.36 oz (67g), allows a comfortable grip regardless of the procedure’s length.
The Bellar’s precise performance make it the ideal device for artists who aim for the best possible results.
Microbeau International pioneers advancements that cater to the most competitive solutions, by creating new standards and shaping the evolution of the micropigmentation industry.

With its comfortable and lightweight design the Bellar makes for easy manoeuvrability. It features a powerful compact MotorBolt system specifically designed to meet the demands of micropigmentation. With a precise stroke length of 2.1mm, it is perfect for accurate PMU techniques. It features an adjustable autoclavable grip to regulate needle depth, plus a disposable grip option. Includes a Mini DC connector cable for optimal connectivity performance. Ideal for hair strokes, eyeliner, whip shading, scalp micropigmentation, and the creation of beauty!

• Powered by a FAULHABER MOTOR.
• The Motor Bolt can be changed easily.
• The springs inside can be easily disassembled and assembled.
• Operating Voltage: 6-12V.
• Standard RCA Connection.
• Stroke: 3.5mm.
• Length: 114mm.
• One Year Limited Warranty.

FK Irons listened to you and created a revolutionary device that puts, you, the tattoo artist, in control of your art. The first truly wireless tattoo machine is here – the Spektra Flux. More power without any of the complicated stuff. Just a pen-style device with all the features you need.

FK Irons have created a Bluetooth enabled device with up to 10 hours of battery life with a fast charging speed of about 1.5 hours. Charge your tattoo machine from any USB-C power plug including your car, laptop, or battery pack. Know where you stand at all times and check your battery life and your voltage usage through an LED indicator. To not over complicate things, they created a user-friendly interface with only 3 buttons so you can spend more time in your art. Prioritising your comfort and safety with a lightweight, ergonomic design that packs most of the weight in the centre, reducing the strain in your arm.

It’s time to unleash your power, embrace the wireless revolution and create your masterpiece. Say goodbye to your annoying cables, rotary, coil machine - even if you’re loyal to the coil, you’ll love the Flux.

• Direct Drive: 4mm Stroke to line and pack colour better
• Lightweight Design: Only 6.3 ounces (178 grams), most of the weight is in the centre
• Dynamic Power Path Management: Always get the same amount of power
• LED Indicator: From here you can check your battery life, pair with devices via Bluetooth, and change voltage
• Changing Voltage: Decrease and increase voltage by half increments
• Detachable battery: Switch to the auxiliary PowerBolt battery.
• Battery life:  Up to 10 hours of life with only 1.5 hours of charging time
• USB-C port: Charge your wireless tattoo machine in your car, laptop, or from a battery pack
• Bluetooth capability: Pair with Darklab app
• Darklab App : Change voltage through voice, access tattoo time and receive firmware updates
• Compatible with most membrane needles
• Voltage : 5-12 Volts
• Grip: 33mm
• Handcrafted in the USA
• These PowerBolts are not compatible with the Killswitch footswitch

Whether you're at the top of your career -or starting your PMU journey -the Xion Mini is the machine designed for everyone.

Microbeau's first compact, pen-style, PMU machine, designed to give artists full control of their work with no compromises. With its 2.5mm stroke, the Xion Mini is versatile and ready to take on all kinds of skin types right out of the box.

Descendant to the Xion S, the Xion Mini is powered by FK Irons' proprietary drive mechanism to provide consistent power with virtually no vibration. With a built-in click grip adjustment system that allows you to fine-tune your needle length with accuracy each time, locking your setting into place.

Powered by RCA connectivity, which comes included, or pair it with Airbolt wireless solutions for ultimate portability, eGive and Siri voice control. Or pair it with the Airbolt Mini for full control during sessions, and for a more hygienic tattooing session. Experience two times the miniature power.

The Xion Mini is a straightforward device that is suitable for all skill levels within your PMU Career. Designed to be maintenance free, allowing you to spend more time creating and less time maintaining your device.

• 2.5mm stroke
• Lightweight at only 3.1 ounces (88g)
• Compact and ergonomic design that reduces hand fatigue
• Built-in click grip adjustment system for needle depth
• Darklab proprietary motor with virtually no vibration
• eGive and Siri voice control capabilities through the Darklab app via wireless solution, the Airbolt Mini
• Compatible with standard membrane cartridges
• RCA connectivity

Two machines, three strokes, one package.

The EZ Nano is an all-round master with 3 strokes, distinguished by its colour (grey 4.2mm, gold 3.5mm) and the extra stroke of 2.5mm that is included in the box, allowing the tattoo artist to switch as wanted.
Light weight at only 67 grams (2.37 ounces) and with an ultra thin (20mm) design, the Nano is super comfortable and reduces hand fatigue for long tattooing sessions.

Features:

• Motor: EZ custom Swiss
• Length: 92mm
• Diameter: 20mm
• Weight: 67g (2.37oz)
• Stroke: 2.5mm, 3.5mm, 4.2mm
• Operating Voltage: 6-8.5V
• Needle Protrusion: 0-4.5mm
• Includes Nano Grey, Nano Gold and 2.5mm stroke wheel

• The first pen-style machine that gives artists full control of parameters to unleash their creative vision.
• Ergonomic and lightweight design for optimal manoeuvrability.
• Convenient interchangeable strokes to suit different styles of tattooing. 3.2mm and 3.7mm Stroke Wheels included with purchase.
• Made of aircraft grade aluminium, the fully assembled machine weighs only 6.56 ounces.
• Secure ratcheting system enables artists to lock-in needle depth settings.
• Seamless, adjustable 40MM Grip is compatible with all needles.
• The Grip of the machine is autoclavable. Use only steam autoclaves at temperatures no higher than 270° Fahrenheit or 132° Celsius.
• Incremental, one-turn Give Knob dial for hard to soft adjustment of needle strike.
• Powerful 6W MotorBolt system - the first motor specifically designed to meet the demands of tattooing.
• Compatible with most power supplies on the market, the Spektra Xion is an all-in-one tool solution for all your tattooing needs.
• Machine Body and MotorBolt can be wiped externally with cold sanitation products.
• Engineered and manufactured in the USA by FK Irons.

Unleash your power. The new Flux Mini unites the wireless power and capabilities of its big sister, Flux S, into a compact design that's a 1/3 smaller footprint. With a grip that measures 19mm in diameter, this slim, ergonomic device packs reliable power in our smallest footprint on the market. ​​

Meet the portable pioneer in PMU, featuring convenient interchangeable power packs, a 2.5mm stroke, and an ergonomic design for enhanced comfort. Slim in design and powerful in performance, the Flux Mini serves the industry's need for a well-balanced, wireless device with long-lasting battery life and the capabilities of earlier models, without compromises.​

Cut the cord. Maximize mobility and increase flexibility for more freedom during procedures. The Flux Mini provides mighty power with a mini price tag, crafted to fit in your back pocket.

• Slim, compact design
• Wireless power in our smallest footprint
• 2.5 mm stroke length
• Proprietary motor design
• Up to 5 hours of battery life*
• Ergonomic shape for comfort
• Enhanced mobility
• Interchangeable battery packs
• User-friendly, intuitive controls
• Accessible price point
• Includes USB-C charge cable
• ***NOT compatible with the Killswitch***

* Battery life subject to voltage, stroke, needle choice, and skin type.

Neuma 4 in three different metal skins:

• Stainless Steel 192g (6.75oz)
• Solid Brass 205g (7.2oz) - Brass requires an added level of maintenance, as the finish can patina. It is recommended that brass is kept very clean and it is not recommended that brass is autoclaved. Brass is naturally antibacterial.
• All Steel 230g (8.1 oz) - This is a Special Edition Neuma 4. The 27mm grip, inner housing, and end cap are all made from stainless steel.

Includes all 4 stroke profile cams in a 3.6mm stroke length:

• 20% cycle
• 28% cycle
• 33% cycle
• 40% cycle

Features:

• 2.75 and 4.2mm stroke cams also available
• Weight: 192g / 205g / 230g
• Length: 90mm (3.6in)
• Diameter: 27mm (1.1in)
• Output: 8.5W
• Operating range: 4.5-9V
• Connector: RCA
• Autoclave Compatible Grip: Yes (Not recommended for brass) 
• Battery Compatible: Yes

NOTE: Some images are computer graphics, actual appearance will vary slightly

Neuma 4 in aluminium with 27mm grip.

NOTE: Epoxy powder-coated Vine cannot be autoclaved.

Includes all 4 stroke profile cams in a 3.6mm stroke length:

• 20% cycle
• 28% cycle
• 33% cycle
• 40% cycle

Features:

• 2.75 and 4.2mm stroke cams also available
• Weight: 115g (4.2oz)
• Length: 90mm (3.6in)
• Diameter: 27mm (1.1in)
• Output: 8.5W
• Operating range: 4.5-9V
• Connector: RCA
• Autoclave Compatible Grip: Yes (except for epoxy powder-coated Vine)
• Battery Compatible: Yes

NOTE: Some images are computer graphics, actual appearance will vary slightly

• Battery Capacity: 1800mAh
• Recharging Time: 2 hours
  
• Working Time: Up to 5 hours
  

Neuma 4 in three different metal skins:

• Stainless Steel 347g (12.25oz)
• Solid Brass 370g (13oz) - Brass requires an added level of maintenance, as the finish can patina. It is recommended that brass is kept very clean and it is not recommended that brass is autoclaved. Brass is naturally antibacterial.
• All Steel 385g (13.6oz) - This is a Special Edition Neuma 4. The 38mm grip, inner housing, and end cap are all made from stainless steel.

Includes all 4 stroke profile cams in a 3.6mm stroke length:

• 20% cycle
• 28% cycle
• 33% cycle
• 40% cycle

Features:

• 2.75 and 4.2mm stroke cams also available
• Weight: 347g / 370g / 385g
• Length: 90mm (3.6in)
• Diameter: 38mm (1.5in)
• Output: 8.5W
• Operating range: 4.5-9V
• Connector: RCA
• Autoclave Compatible Grip: Yes (Not recommended for brass) 
• Battery Compatible: Yes

NOTE: Some images are computer graphics, actual appearance will vary slightly

Neuma 4 in three different metal skins:

• Stainless Steel 244g (8.6oz)
• Solid Brass 270g (9.5oz) - Brass requires an added level of maintenance, as the finish can patina. It is recommended that brass is kept very clean and it is not recommended that brass is autoclaved. Brass is naturally antibacterial.
• All Steel 290g (10.2oz) - This is a Special Edition Neuma 4. The 33mm grip, inner housing, and end cap are all made from stainless steel.

Includes all 4 stroke profile cams in a 3.6mm stroke length:

• 20% cycle
• 28% cycle
• 33% cycle
• 40% cycle

Features:

• 2.75 and 4.2mm stroke cams also available
• Weight: 244g / 270g / 290g
• Length: 90mm (3.6in)
• Diameter: 33mm (1.3in)
• Output: 8.5W
• Operating range: 4.5-9V
• Connector: RCA
• Autoclave Compatible Grip: Yes (Not recommended for brass) 
• Battery Compatible: Yes

NOTE: Some images are computer graphics, actual appearance will vary slightly

Important: Please be aware that all warranty issues are handled exclusively by Axys and this may require that the machine be returned by the buyer to Axys in the US. For information about this process see the Axys contact and repair page
Every Axys Machine is warrantied for 1 year after the date of its sale. Warranty covers any mechanical failure due to manufacturing defects.

All those times you had to set up multiple machines…
All those times you had only one, but you worked hard to make it work anyway.
Those times are behind you now, because the Axys Valkyr gives you the edge you need to be able to do an unbelievably wide range of work. Whether you are doing world class black & grey or high end lips and eyebrows, the Valkyr will leave you with no unfulfilled desires. What’s more, this machine is also a competitive liner despite it’s flare for shading and blending.

This isn’t just another pen with a spinning grip. You not only adjust needle protrusion with the Valkyr’s grip, but the stroke options allow you to choose your hit. Whatever you need to do: lining, packing, colouring, blending, shading, its all there at your fingertips, 5 strokes in 1.

• 1.9mm
• 2.2mm
• 2.6mm
• 2.9mm
• 3.2mm

Features and Specs:

• Driven by a 4.5 watt, Swiss made, Maxon precision motor.
• Fully American manufactured and assembled.
• Constructed of 6061-T6 aluminium, finished in Mil Spec Type II anodizing.
• American made Main Bearing.
• 5 strokes in one machine, changeable on the fly.
• Primary range of 7 volts to 10.5 volts.
• Lubricated for life.
• No need for maintenance.
• 100% grip compatibility with the Valhalla.
• Uses RCA connection (**does not come with cord**).

Neuma 4 in four different metal skins:

• Stainless Steel 220g (7.8oz)
• Solid Brass 240g (8.5oz) - Brass requires an added level of maintenance, as the finish can patina. It is recommended that brass is kept very clean and it is not recommended that brass is autoclaved. Brass is naturally antibacterial.
• All Steel 280g (10oz) - This is a Special Edition Neuma 4. The 33mm grip, inner housing, and end cap are all made from stainless steel.
• Aluminium electroless nickel-plated in Pewter colour 126g (4.4oz)

This machine comes with the Neuma “Shift” 33mm grip. This grip is a multi-function grip designed to act as both an ergonomic concave design for precise control as well as a dual-position grip to allow for use of the top of the grip, further from the needles, as well as the bottom of the grip, the traditional position.
For a looser style of tattooing (for example when doing loose shading and textures, etc.), hold your grip with the top row of traction grooves, away from the needles and similar to the way you would hold a paintbrush. For a more technical, controlled style (for example when lining), hold your grip with the bottom row of traction grooves, near the needles, the way tattoo machines are traditionally held. The concave section of this grip is designed to, alternatively, be a thumb and index finger grip to add a level of comfort and control for those who prefer this type of ergonomics.

Includes all 4 stroke profile cams in a 3.6mm stroke length:

• 20% cycle
• 28% cycle
• 33% cycle
• 40% cycle

Features:

• 2.75 and 4.2mm stroke cams also available
• Weight: 220g / 240g / 280g / 126g
• Length: 90mm (3.6in)
• Diameter: 33mm (1.3in)
• Output: 8.5W
• Operating range: 4.5-9V
• Connector: RCA
• Autoclave Compatible Grip: Yes (Not recommended for brass) 
• Battery Compatible: Yes

NOTE: Some images are computer graphics, actual appearance will vary slightly

Neuma 4 in aluminium with 33mm grip.

NOTE: Epoxy powder-coated Vine cannot be autoclaved.

Includes all 4 stroke profile cams in a 3.6mm stroke length:

• 20% cycle
• 28% cycle
• 33% cycle
• 40% cycle

Features:

• 2.75 and 4.2mm stroke cams also available
• Weight: 137g (4.8oz)
• Length: 90mm (3.6in)
• Diameter: 33mm (1.3in)
• Output: 8.5W
• Operating range: 4.5-9V
• Connector: RCA
• Autoclave Compatible Grip: Yes (except for epoxy powder-coated Vine)
• Battery Compatible: Yes

NOTE: Some images are computer graphics, actual appearance will vary slightly

Important: Please be aware that all warranty issues are handled exclusively by Axys and this may require that the machine be returned by the buyer to Axys in the US. For information about this process see the Axys contact and repair page
Every Axys Machine is warrantied for 1 year after the date of its sale. Warranty covers any mechanical failure due to manufacturing defects.

Fehu – (“fey-you”, like “hey-you”)

Features and Specs:

• Centre balance, just like a pen.
• Uses any cartridge grip.
• 45 degree RCA.
• 3.5mm stroke - general purpose, all-around stroke for almost all applications.
• Only 2.6oz (76g)
• Autoclavable vise and forward body.
• Uses a Swiss Maxon motor.
• Made in America.

The Fourth Collection
This collection is for the fans who are one with the force. Featuring special designs honouring four iconic characters from a galaxy far far away. Just in time to celebrate May the 4th, feel the force with FK Irons' first ever celebration collection: The Fourth Collection.

FK Irons listened to you and created a revolutionary device that puts, you, the tattoo artist, in control of your art. The first truly wireless tattoo machine is here – the Spektra Flux. More power without any of the complicated stuff. Just a pen-style device with all the features you need.

FK Irons have created a Bluetooth enabled device with up to 10 hours of battery life with a fast charging speed of about 1.5 hours. Charge your tattoo machine from any USB-C power plug including your car, laptop, or battery pack. Know where you stand at all times and check your battery life and your voltage usage through an LED indicator. To not over complicate things, they created a user-friendly interface with only 3 buttons so you can spend more time in your art. Prioritising your comfort and safety with a lightweight, ergonomic design that packs most of the weight in the centre, reducing the strain in your arm.

It’s time to unleash your power, embrace the wireless revolution and create your masterpiece. Say goodbye to your annoying cables, rotary, coil machine - even if you’re loyal to the coil, you’ll love the Flux.

• Direct Drive: 4mm Stroke to line and pack colour better
• Lightweight Design: Only 6.3 ounces (178 grams), most of the weight is in the centre
• Dynamic Power Path Management: Always get the same amount of power
• LED Indicator: From here you can check your battery life, pair with devices via Bluetooth, and change voltage
• Changing Voltage: Decrease and increase voltage by half increments
• Detachable battery: Switch to the auxiliary PowerBolt battery.
• Battery life:  Up to 10 hours of life with only 1.5 hours of charging time
• USB-C port: Charge your wireless tattoo machine in your car, laptop, or from a battery pack
• Bluetooth capability: Pair with Darklab app
• Darklab App : Change voltage through voice, access tattoo time and receive firmware updates
• Compatible with most membrane needles
• Voltage : 5-12 Volts
• Grip: 33mm
• Handcrafted in the USA
• These PowerBolts are not compatible with the Killswitch footswitch.

FK Irons presents Flux Ti - the industry's first titanium pen style machine.

The rise of a Heavy Hitter
At 7.5oz (212g), the hefty mass resembles the lining and packing feel of traditional coil machines, but with zero pull back force. The weight is redirected right at the needle tip, making pigment saturation a breeze even with large needle configurations.

Built to outlast you
Its high strength and corrosion resistant qualities makes titanium the top choice for industries such as medical and military, and now FK Irons delivers these standards to the tattoo industry with the Flux Ti.

Comfort meets Mass
While the Flux Ti provides you with a hefty feel, its geometric design and balance still provides comfortable manoeuvrability for those long sessions.

The Power of Powering
Choose your power option, from traditional RCA cables - or cut the cord and go wireless with our PowerBolt or LightningBolt wireless solutions (Titanium PowerBolt not available).

• Please note - Flux Ti does not include a battery
• 4mm direct drive
• Made from 100% pure titanium
• Custom limited edition box
• Compatible with most membrane needles
• Voltage : 5-12 Volts
• Grip: 33 mm
• Handcrafted in the USA

Flux Max brings you more control, more convenience and more innovation from inside out to take your skills to the max.
This is FK Irons first machine with state-of-the-art technology that learns how you like to work, from the type of ink to the tip/needle, the level of pressure you apply and setting choices. It senses, adapts and optimizes for a smoother tattooing experience.
The Flux Max features a new, built-in menu via digital display. All features and settings can be adjusted directly on your machine for maximum control.
Choose settings, apply eGive, read battery life, and select power level in either volts or hertz for improved accuracy. Reaching a new low of 4V/66HZ, select by 0.5 or 0.1 to find your sweet spot.

Features:

• Three Available Stroke Options: 3.2 mm | 4.0 mm | 4.5 mm
• Modular Versatility: The Flux Max is compatible with existing FK Irons grips, Powerbolt batteries, and Killswitch.
• Comfortable, Durable Design: 7.23 oz. (205g)
• Dynamic Power Path Management: Get reliable, consistent power levels.
• Fully Built-In Digital Menu: Easily read battery life, change settings and power level.
• Newly Designed Ergonomic Grip: 38 mm
• Responsive eGive Settings: Choose from three levels of eGive (0-3).
• Built-In Time Tracker: Track time during sessions directly on your machine.
• Changing Power: View in both Volts and Hertz for improved accuracy. Adjust power by 0.1 or 0.5.
• Bluetooth Capability: Improved wireless connectivity and range. Pair with Darklab mobile app for alternate setting controls and machine updates.
• Detachable Battery: Compatible with existing PowerBolt and PowerBolt+ batteries.
• Battery life: An average of 5-6 hours of battery life, dependent on functional preferences. Full charge in 2 hours when used with the included USB-C charging cable.
• USB-C port: For best results, use USB-C charging cord included.
• Power Supply: 4-12 Volts; 66-199 Hertz
• Engineered & manufactured in the USA

Features:

• Custom Mini DC Connector and lightweight cable for optimal consistency.
• Powerful and compact motor for unstoppable performance.
• Precise 2.3mm stroke specifically designed to deliver accurate pigment implantation.
• Stabiliser rings for smooth adjustment.
• Autoclavable grip to regulate needle protrusion.
• Comfortable, ergonomic and perfectly weighted design, only 3.75 oz.
• Compatible with most tattoo cartridges.

Contains everything you need for the ultimate wireless experience in-house and on the go - offered in Liner, Packer or Shader options.

• The Wand you already know and love – with a new magnetic backplate that allows the Bishop x Critical batteries to sit flush on the machine.
• When used with the Shorty battery, the Power Wand is only 4.4” and 5.2oz - the lightest set up on the market currently!
• Compatible with all Critical Connect firmware and hardware - including the Critical Connect Footswitch.
• The magnetic connection allows for a 360 degree positioning of the battery and allows for an easy, quick swap if your battery needs to be changed.
• The full set comes with 1 Power Wand, 1 Power Wand Battery Pack (1500 mAh), 1 Power Wand Shorty Battery Pack (800mAh), 1 Power Wand RCA Adapter, one 7ft RCA Cord (Grey), 1 Critical Universal Battery Dock (2 battery slots), and 1 6ft Charging Cord for the dock.
• A note regarding the readout on these batteries: if you see the battery percentage fluctuating, the battery is calibrating to provide you with the most accurate battery life read-out and has no effect on the functionality and run time of your battery/machine.
• Tier 1 grade battery used to make this power pack.
• After powering on, initial battery life display will take approximately 5 seconds to calibrate to an accurate read-out.
• You may notice the battery life adjust (increases or drops) between activation and pauses during sessions – this is because the battery calibration is reflecting the device’s current usage scenario.
• Note the percentage difference may be more noticeable on the Shorty batteries due to the smaller battery capacity.

The all new Neuma 4 Macro machine in aluminum (anodized).

The Neuma 4 Macro has the same mechanism and the same cams and bearing arms as the original Neuma 4, with a larger motor with 50% more power! This machine is designed for use with larger needle groupings, or for anyone who prefers to tattoo very hard and fast. The original Neuma 4 is a better option for most tattoo artists and tattoo applications, but if you desire the hardest hitting machine possible, this is it.

Includes all 4 stroke profile cams in a 3.6mm stroke length:

• 20% cycle
• 28% cycle
• 33% cycle
• 40% cycle

Features:

• 2.75 and 4.2mm stroke cams also available
• Weight: 138g | 160g | 155g | 193g
• Length: 104mm (4.1in)
• Output: 8.5W
• Torque: 10mNm
• Operating range: 4.5-9V
• Connector: RCA
• Autoclave Compatible Grip: Yes
• Battery Compatible: Yes

NOTE: Some images are computer graphics, actual appearance will vary slightly

The all new Neuma 4 Macro machine in aluminum (anodized).

The Neuma 4 Macro has the same mechanism and the same cams and bearing arms as the original Neuma 4, with a larger motor with 50% more power! This machine is designed for use with larger needle groupings, or for anyone who prefers to tattoo very hard and fast. The original Neuma 4 is a better option for most tattoo artists and tattoo applications, but if you desire the hardest hitting machine possible, this is it.

Includes all 4 stroke profile cams in a 3.6mm stroke length:

• 20% cycle
• 28% cycle
• 33% cycle
• 40% cycle

Features:

• 2.75 and 4.2mm stroke cams also available
• Weight: 138g | 160g | 155g | 193g
• Length: 104mm (4.1in)
• Output: 8.5W
• Torque: 10mNm
• Operating range: 4.5-9V
• Connector: RCA
• Autoclave Compatible Grip: Yes
• Battery Compatible: Yes

NOTE: Some images are computer graphics, actual appearance will vary slightly

The all new Neuma 4 Macro machine in aluminum (anodized).

The Neuma 4 Macro has the same mechanism and the same cams and bearing arms as the original Neuma 4, with a larger motor with 50% more power! This machine is designed for use with larger needle groupings, or for anyone who prefers to tattoo very hard and fast. The original Neuma 4 is a better option for most tattoo artists and tattoo applications, but if you desire the hardest hitting machine possible, this is it.

Includes all 4 stroke profile cams in a 3.6mm stroke length:

• 20% cycle
• 28% cycle
• 33% cycle
• 40% cycle

Features:

• 2.75 and 4.2mm stroke cams also available
• Weight: 138g | 160g | 193g
• Length: 104mm (4.1in)
• Output: 8.5W
• Torque: 10mNm
• Operating range: 4.5-9V
• Connector: RCA
• Autoclave Compatible Grip: Yes
• Battery Compatible: Yes

NOTE: Some images are computer graphics, actual appearance will vary slightly

The all new Neuma 4 Macro machine in aluminum (anodized).

The Neuma 4 Macro has the same mechanism and the same cams and bearing arms as the original Neuma 4, with a larger motor with 50% more power! This machine is designed for use with larger needle groupings, or for anyone who prefers to tattoo very hard and fast. The original Neuma 4 is a better option for most tattoo artists and tattoo applications, but if you desire the hardest hitting machine possible, this is it.

Includes all 4 stroke profile cams in a 3.6mm stroke length:

• 20% cycle
• 28% cycle
• 33% cycle
• 40% cycle

Features:

• 2.75 and 4.2mm stroke cams also available
• Weight: 138g | 160g | 155g | 193g
• Length: 104mm (4.1in)
• Output: 8.5W
• Torque: 10mNm
• Operating range: 4.5-9V
• Connector: RCA
• Autoclave Compatible Grip: Yes
• Battery Compatible: Yes

NOTE: Some images are computer graphics, actual appearance will vary slightly

The all new Neuma 4 Macro machine in aluminum (anodized).

The Neuma 4 Macro has the same mechanism and the same cams and bearing arms as the original Neuma 4, with a larger motor with 50% more power! This machine is designed for use with larger needle groupings, or for anyone who prefers to tattoo very hard and fast. The original Neuma 4 is a better option for most tattoo artists and tattoo applications, but if you desire the hardest hitting machine possible, this is it.

Includes all 4 stroke profile cams in a 3.6mm stroke length:

• 20% cycle
• 28% cycle
• 33% cycle
• 40% cycle

Features:

• 2.75 and 4.2mm stroke cams also available
• Weight: 138g | 160g | 193g
• Length: 104mm (4.1in)
• Output: 8.5W
• Torque: 10mNm
• Operating range: 4.5-9V
• Connector: RCA
• Autoclave Compatible Grip: Yes
• Battery Compatible: Yes

NOTE: Some images are computer graphics, actual appearance will vary slightly

The all new Neuma 4 Macro machine in aluminum (anodized).

The Neuma 4 Macro has the same mechanism and the same cams and bearing arms as the original Neuma 4, with a larger motor with 50% more power! This machine is designed for use with larger needle groupings, or for anyone who prefers to tattoo very hard and fast. The original Neuma 4 is a better option for most tattoo artists and tattoo applications, but if you desire the hardest hitting machine possible, this is it.

Includes all 4 stroke profile cams in a 3.6mm stroke length:

• 20% cycle
• 28% cycle
• 33% cycle
• 40% cycle

Features:

• 2.75 and 4.2mm stroke cams also available
• Weight: 160g | 155g
• Length: 104mm (4.1in)
• Output: 8.5W
• Torque: 10mNm
• Operating range: 4.5-9V
• Connector: RCA
• Autoclave Compatible Grip: Yes
• Battery Compatible: Yes

NOTE: Some images are computer graphics, actual appearance will vary slightly

The new 2nd generation Neuma 4 Modus in aluminum (anodized).

Improved Mechanism

• Improved stability
• Interoperable with the original first generation Neuma 4

Improved Functionality

• Oversized adjuster
• 9mm range of depth
• Maximum needle extension (for maximum throw)
• Full needle retraction (for minimum throw)
• Enlarged RCA opening
• Compatible with original first generation parts and accessories

Improved Ergonomics

• Oversized grooves
• Groove/cartridge alignment
• Improved grip profiles
• Low centre of gravity
• All new grip designs

Includes all 4 stroke profile cams in a 3.6mm stroke length:

• 20% cycle
• 28% cycle
• 33% cycle
• 40% cycle

Features:

• 2.75 and 4.2mm stroke cams also available
• Weight: 120g | 145g | 145g | 175g
• Length: 93mm (3.6in)
• Output: 8.5W
• Operating range: 4.5-9V
• Connector: RCA
• Autoclave Compatible Grip: Yes
• Battery Compatible: Yes

NOTE: Some images are computer graphics, actual appearance will vary slightly

The new 2nd generation Neuma 4 Modus in aluminum (anodized).

Improved Mechanism

• Improved stability
• Interoperable with the original first generation Neuma 4

Improved Functionality

• Oversized adjuster
• 9mm range of depth
• Maximum needle extension (for maximum throw)
• Full needle retraction (for minimum throw)
• Enlarged RCA opening
• Compatible with original first generation parts and accessories

Improved Ergonomics

• Oversized grooves
• Groove/cartridge alignment
• Improved grip profiles
• Low centre of gravity
• All new grip designs

Includes all 4 stroke profile cams in a 3.6mm stroke length:

• 20% cycle
• 28% cycle
• 33% cycle
• 40% cycle

Features:

• 2.75 and 4.2mm stroke cams also available
• Weight: 120g | 145g | 145g | 175g
• Length: 93mm (3.6in)
• Output: 8.5W
• Operating range: 4.5-9V
• Connector: RCA
• Autoclave Compatible Grip: Yes
• Battery Compatible: Yes

NOTE: Some images are computer graphics, actual appearance will vary slightly

Flux Max brings you more control, more convenience and more innovation from inside out to take your skills to the max.
This is FK Irons first machine with state-of-the-art technology that learns how you like to work, from the type of ink to the tip/needle, the level of pressure you apply and setting choices. It senses, adapts and optimizes for a smoother tattooing experience.
The Flux Max features a new, built-in menu via digital display. All features and settings can be adjusted directly on your machine for maximum control.
Choose settings, apply eGive, read battery life, and select power level in either volts or hertz for improved accuracy. Reaching a new low of 4V/66HZ, select by 0.5 or 0.1 to find your sweet spot.

Features:

• Three Available Stroke Options: 3.2 mm | 4.0 mm | 4.5 mm
• Modular Versatility: The Flux Max is compatible with existing FK Irons grips, Powerbolt batteries, and Killswitch.
• Comfortable, Durable Design: 7.23 oz. (205g)
• Dynamic Power Path Management: Get reliable, consistent power levels.
• Fully Built-In Digital Menu: Easily read battery life, change settings and power level.
• Newly Designed Ergonomic Grip: 38 mm
• Responsive eGive Settings: Choose from three levels of eGive (0-3).
• Built-In Time Tracker: Track time during sessions directly on your machine.
• Changing Power: View in both Volts and Hertz for improved accuracy. Adjust power by 0.1 or 0.5.
• Bluetooth Capability: Improved wireless connectivity and range. Pair with Darklab mobile app for alternate setting controls and machine updates.
• Detachable Battery: Compatible with existing PowerBolt and PowerBolt+ batteries.
• Battery life: An average of 5-6 hours of battery life, dependent on functional preferences. Full charge in 2 hours when used with the included USB-C charging cable.
• USB-C port: For best results, use USB-C charging cord included.
• Power Supply: 4-12 Volts; 66-199 Hertz
• Engineered & manufactured in the USA

The new Elite Fly V3 battery pen features a Panasonic 18500 battery and 4 channels for saving voltage settings.

Features:

• Stroke Length: 3.5mm (Red) or 4.0mm (Black)
• Operation Voltage: 4-12V
• Speed: 10400rpm
• Battery Capacity: 2040mAh
• Battery Life: 8-12 hours (depending on voltage and cartridges)
• Dimensions: 33.5mm x 125mm
• Includes charger and cable

Introducing Perma Blend's first compact PMU machine designed to empower artists to possess full control of their work without sacrificing their quality.

Perma Blend is introducing its first-ever PMU machine, designed to empower the artist of every skill level and provide ultimate comfort and precision without compromise. With a 2.7mm stroke, this pen-style machine offers versatility for a variety of PMU procedures. Beauty and engineering expertise come together to create a high-quality PMU machine designed to deliver consistent results in a compact, ergonomic design. Featuring a convenient, built-in "click" grip adjustment system and minimal vibration, the Perma Pen gives PMU artists confidence in a comfortable, controlled experience.​

Weighing only 3.1 ounces, this mini device helps provide comfort and reduce hand fatigue during any PMU procedure. With the eGive adjustment system, artists can control the "give" or resistance of the needle's impact on the skin, allowing for smoother control and optimal, healed results. ​The 2.7mm stroke featured on the Perma Pen allows the artist to deliver in-depth pigment deposit with every pass and unparalleled precision.

Features:

• Lightweight design​
• 2.7mm stroke​
• Grip: 23.5mm
• Length: 93mm
• Click Grip adjustment​
• Improved ergonomics​
• Minimal vibration​
• RCA connectivity​ - cable sold separately

Unleash your power. The new Flux Mini unites the wireless power and capabilities of its big sister, Flux S, into a compact design that's a 1/3 smaller footprint. With a grip that measures 19mm in diameter, this slim, ergonomic device packs reliable power in our smallest footprint on the market. ​​

Meet the portable pioneer in PMU, featuring convenient interchangeable power packs, a 3.0mm stroke, and an ergonomic design for enhanced comfort. Slim in design and powerful in performance, the Flux Mini serves the industry's need for a well-balanced, wireless device with long-lasting battery life and the capabilities of earlier models, without compromises.​

Cut the cord. Maximize mobility and increase flexibility for more freedom during procedures. The Flux Mini provides mighty power with a mini price tag, crafted to fit in your back pocket.

• Slim, compact design
• Wireless power in our smallest footprint
• 3.0 mm stroke length
• Proprietary motor design
• Up to 5 hours of battery life*
• Ergonomic shape for comfort
• Enhanced mobility
• Interchangeable battery packs
• User-friendly, intuitive controls
• Accessible price point
• Includes USB-C charge cable
• ***NOT compatible with the Killswitch***

* Battery life subject to voltage, stroke, needle choice, and skin type.

FK Irons is joining the Hope vs Cancer Foundation in the fight against childhood cancer. Every Golden Flux Max helps fund paediatric cancer research. Hope vs Cancer has a special connection to the tattoo community, using tattoo art to lift children's spirits and raise hope vs cancer.

This is the first, special edition Flux Max, inspired by the gold ribbon for Childhood Cancer Awareness. Join artists around the world in the fight against childhood cancer.

Flux Max brings you more control, more convenience and more innovation from inside out to take your skills to the max.
This is FK Irons first machine with state-of-the-art technology that learns how you like to work, from the type of ink to the tip/needle, the level of pressure you apply and setting choices. It senses, adapts and optimizes for a smoother tattooing experience.
The Flux Max features a new, built-in menu via digital display. All features and settings can be adjusted directly on your machine for maximum control.
Choose settings, apply eGive, read battery life, and select power level in either volts or hertz for improved accuracy. Reaching a new low of 4V/66HZ, select by 0.5 or 0.1 to find your sweet spot.

Features:

• Three Available Stroke Options: 3.2 mm | 4.0 mm | 4.5 mm
• Modular Versatility: The Flux Max is compatible with existing FK Irons grips, Powerbolt batteries, and Killswitch.
• Comfortable, Durable Design: 7.23 oz. (205g)
• Dynamic Power Path Management: Get reliable, consistent power levels.
• Fully Built-In Digital Menu: Easily read battery life, change settings and power level.
• Newly Designed Ergonomic Grip: 38 mm
• Responsive eGive Settings: Choose from three levels of eGive (0-3).
• Built-In Time Tracker: Track time during sessions directly on your machine.
• Changing Power: View in both Volts and Hertz for improved accuracy. Adjust power by 0.1 or 0.5.
• Bluetooth Capability: Improved wireless connectivity and range. Pair with Darklab mobile app for alternate setting controls and machine updates.
• Detachable Battery: Compatible with existing PowerBolt and PowerBolt+ batteries.
• Battery life: An average of 5-6 hours of battery life, dependent on functional preferences. Full charge in 2 hours when used with the included USB-C charging cable.
• USB-C port: For best results, use USB-C charging cord included.
• Power Supply: 4-12 Volts; 66-199 Hertz
• Engineered & manufactured in the USA

Important: Please be aware that all warranty issues are handled exclusively by FK Irons and this may require that the machine be returned by the buyer to FK Irons in the US. For information about this process see the FK Irons repairs page
All FK Irons machines come with a one-year manufacturer's warranty from the date of purchase. This warranty covers any manufacturer's defect. Proof of purchase is required to claim warranty.

The new and improved second generation of Bellar, a pen-style machine tailored to the artist who craves the ultimate precision during linework PMU procedures. With a 2.7mm stroke length, this machine offers even more versatility than its predecessor and allows for cleaner, in-depth pigment deposit while providing enhanced comfort.

Pair the Bellar V2 with the Airbolt Mini, a lightweight alternative to traditional RCA cables that allows for enhanced movement. Bellar V2 features a new and improved “click” grip adjustment, an artist-friendly feature for more responsive adjustment during PMU procedures. Bellar V2 combines beauty and sophistication with accessibility. At a significantly more affordable price point, this device makes it possible for the artist to have luxury PMU machinery without the high price tag.

Engineered to elevate the PMU experience, Bellar V2 can take on all types of linework procedures and deliver consistent healed results.

• Pen-Style Feel: Comfortable design allowing for detailed linework
• 2.7 mm Stroke: Higher stroke providing versatility to the perfectionist artist
• Affordable Price Point: Elegance and beauty meet accessibility
• Click-grip Adjustment: Enhanced responsive control for the artist
• Slim and Lightweight: Weighs only 2.86oz (81g)
• Mini DC Connector: Lightweight alternative to RCA cables that is for optimal connectivity performance
• Compatible with Standard Universal Membrane Cartridges
• Made in the USA

This special edition Flux Max is ablaze with a matte, soft-touch finish and additional PowerBolt II battery.

Flux Max brings you more control, more convenience and more innovation from inside out to take your skills to the max.
This is FK Irons first machine with state-of-the-art technology that learns how you like to work, from the type of ink to the tip/needle, the level of pressure you apply and setting choices. It senses, adapts and optimizes for a smoother tattooing experience.
The Flux Max features a new, built-in menu via digital display. All features and settings can be adjusted directly on your machine for maximum control.
Choose settings, apply eGive, read battery life, and select power level in either volts or hertz for improved accuracy. Reaching a new low of 4V/66HZ, select by 0.5 or 0.1 to find your sweet spot.

Features:

• Stroke: 4.0 mm
• Modular Versatility: The Flux Max is compatible with existing FK Irons grips, Powerbolt batteries, and Killswitch.
• Comfortable, Durable Design: 7.23 oz. (205g)
• Dynamic Power Path Management: Get reliable, consistent power levels.
• Fully Built-In Digital Menu: Easily read battery life, change settings and power level.
• Newly Designed Ergonomic Grip: 38 mm
• Responsive eGive Settings: Choose from three levels of eGive (0-3).
• Built-In Time Tracker: Track time during sessions directly on your machine.
• Changing Power: View in both Volts and Hertz for improved accuracy. Adjust power by 0.1 or 0.5.
• Bluetooth Capability: Improved wireless connectivity and range. Pair with Darklab mobile app for alternate setting controls and machine updates.
• Detachable Battery: Compatible with existing PowerBolt and PowerBolt+ batteries.
• Battery life: An average of 5-6 hours of battery life, dependent on functional preferences. Full charge in 2 hours when used with the included USB-C charging cable.
• USB-C port: For best results, use USB-C charging cord included.
• Power Supply: 4-12 Volts; 66-199 Hertz
• Engineered & manufactured in the USA