Tattoo Equipment

• Compatible with coil and rotary machines
• Built in neodymium magnets for a strong hold
• Jump start enabled for hard starting machines
• 6 amp peak inrush current, 3 amp true RMS continuous current
• Pedal override button (no need for a foot pedal if you run continuous mode)
• Precision regulated set point voltage 0-17vdc
• Built in short circuit protection
• 0.1 volt adjustment resolution
• 2 Voltage presets
• Momentary or Maintained foot switch modes. (Easy one button toggle)
• Non volatile memory (holds presets even when power is removed)
• Universal input 110-240vac 50/60hz
• Accepts standard 1/4″ clip cord and foot pedal connections
• Easily bagged with typical machine or bottle baggies
• Additional mounting options available in store
• 2 year full manufacturing warranty
• Made in the USA

Turn your favorite rotary machine into a wireless powerhouse with the Critical Universal Battery.

Available in both RCA and 3.5mm (Cheyenne) connection types, this battery pack is compatible with most rotary machines.

The Critical Universal Battery offers an ergonomic, balanced, and intuitive interface that provides an experience of true freedom.

Features:

• Compatible with most rotary brands
• Available in both RCA & 3.5mm (Cheyenne) connections
• Critical Core equals consistent and stable voltage output
• Dual charging capable dock optional
• Light weight and balanced
• Intuitive user interface
• Up to 10+ hours of tattoo time (depending on voltage use and machine)

Product Specifications:

• Length: 2.47"
• Width: 1.26"
• Weight: 2oz
• Voltage Range 4v-13v
• Colour: Black

Unleash your power. If you love the Spektra Flux, you know the PowerBolt is the brain and power supply of the machine. The detachable PowerBolt battery supply provides an extra peace of mind. Two is better than one – especially for those artists that are on the road or want a backup for when the battery is running low. Attaching and detaching the PowerBolt is easy with just a quick quarter-turn. Simply recharge as needed. Just plug into a USB-C cable. The PowerBolt provides the ultimate peace of mind in backup for busy artists.

• Battery supply for the Flux wireless tattoo machine
• Detach and attach effortlessly with 1/4 turn
• Battery life: Up to 10 hours of life with only 1.5 hours of charging time
• USB-C port: Charge your PowerBolt from any standard USB-C cord. This is perfect for the traveling artist or for trade shows
• LED Indicator : Easily check your operating voltage and battery life
• Changing Voltage: Simply decrease and increase voltage by half increments via two buttons
• Darklab App: Change voltage through voice, access tattoo time and receive firmware updates
• Manufactured in the USA

Compact and with new unparalleled touch screen technology, Easy Touch 2 is an extraordinary power supply from EZ.

• Available in smoke white gloss and jet black gloss.
• Suitable for all tattoo machines - rotary, coil, pen machine, etc.
• Brightly lit green LCD display and lit buttons.
• Two voltage presets.
• 7 colours to indicate voltage in "colour breathing mode".
• Built-in magnets for mounting to metal surfaces.
• Onboard footswitch button or maintained footswitch modes - easy one button toggle.
• Accepts standard 1/4" clip cord and footswitch connections.
• CE certified.

Specifications:

• Voltage Range: 1.5 - 17V
• Input: 100 - 240V, 50 to 60Hz, 1.5A Max
• Output: 18V/2.36A max
• Power Connector: 5.5 mm Power Jack
• Display: LED green display
• Size: 75 x 75 x 29mm
• Weight: 110g (3.88oz)

The Ultimate Wireless Tattooing Experience

The Critical Connect Universal Battery utilizes Bluetooth 5.0 and Critical Core technology - created for consistent power and extreme accuracy. Experience ultimate power, freedom, and versatility.

Features:

• Crisp OLED Display and Precise Voltage
• Ergonomic Design
• Utilizes Bluetooth 5.0 Technology
• Utilizes Critical Core – created for consistent power and extreme accuracy.
• Available in both RCA and 3.5mm connections
• Compatible with most rotary brands
• Featured jumpstart assist for large needle groupings and hard starting motors
• Control the On/Off function of the batteries through two modes: Continuous and Momentary
• Compatible and wirelessly connects with the Critical Connect Foot Switch*
• Connect up to (4) Critical Connect batteries to (1) Critical Connect Foot Switch for adaptability and cordless freedom
• Dual charging capable dock (optional)
• Up to 10+ hours of tattoo time
• Voltage Range 4.5-13v
• Size: 2.4 x 1.2in
• Weight: 2oz
• USB-C Charger Cable Included
• Instruction Manual Included

*Important: Critical Connect Universal Batteries are compatible and wirelessly connect with ONLY the Critical Connect Foot Switch (simultaneously, the Critical Connect Foot Switch is ONLY compatible with Critical Connect batteries).

• Compatible with all coil and rotary machines.
• Built in magnets and grippy silicone for use on a variety of surfaces.
• Simple push/Rotary control to turn on/off output and to change voltage (No pedal required to run).
• Colour indicates voltage (range 1.5 – 17).
• 6 amp peak inrush current, 3 amp true RMS continuous current.
• Maintained or momentary foot pedal modes.
• Jump start enabled for hard starting rotaries.
• Fully machined, anodised aluminium housing – available in silver or black.
• Dimensions: 1 3/4” height, 2 7/8” diameter, 6.4 oz weight.
• Comprehensive 2 year manufacturers warranty.
• Includes: Atom power supply, power cord and power adaptor.
• Made in the USA.

The Ultimate Wireless Tattooing Experience

True power comes in a small package with the Critical Connect Universal Battery Shorty, one of the lightest and smallest battery packs on the market. Perfect for quick sessions, PMU artists, and tattoo artists who prefer an overall lighter weight.

Features:

• Crisp OLED Display and Precise Voltage
• Ergonomic Design
• Utilizes Bluetooth 5.0 Technology
• Utilizes Critical Core – created for consistent power and extreme accuracy.
• Available in both RCA and 3.5mm connections
• Compatible with most rotary brands
• Featured jumpstart assist for large needle groupings and hard starting motors
• Control the On/Off function of the batteries through two modes: Continuous and Momentary
• Compatible and wirelessly connects with the Critical Connect Foot Switch*
• Connect up to (4) Critical Connect batteries to (1) Critical Connect Foot Switch for adaptability and cordless freedom
• Dual charging capable dock (optional)
• Up to 5+ hours of tattoo time
• Voltage Range 4.5-13v
• Size: 2 x 1.2in
• Weight: 1.5oz
• USB-C Charger Cable Included
• Instruction Manual Included

*Important: Critical Connect Universal Batteries are compatible and wirelessly connect with ONLY the Critical Connect Foot Switch (simultaneously, the Critical Connect Foot Switch is ONLY compatible with Critical Connect batteries).

• Material: Aluminium
• Input Voltage：DC5V/1A
• Output Voltage：6, 7, 8, 9, 11V
• Charge Mode: type-2 quick charge
• Connection: RCA
• Battery Capacity: 1200mAh
• Running Time: Up to 8 hours (full charge)
• Jump Start Volt: 9V 0.2 Seconds
• Includes USB-C charge cord

FK Irons strives to develop products to revolutionize and innovate the tattoo industry. That’s why they engineered a powerful battery that’s not only well-balanced but can be universally connected to any RCA machine on the current market. It’s the one battery to power them all.

This revolutionary power supply can be connected to any RCA machine - as long as the RCA jack isn’t blocked. Its compact design is great for easy travel, and it keeps in mind the machine’s Ergonomic Balance Point. Weighing only 2oz, the LightningBolt Uni may be small, but can still power your machines for up to 10 hours - depending on voltage. That’s power. It also has Bluetooth capabilities and can be paired with the Darklab app for ultimate wireless control. The LightningBolt Uni was designed to be the only power supply artists need and provide power for all.

• Immerse yourself in art with a wireless tattoo battery pack that turns your tattoo machine wireless
• Connect to Bluetooth and pair with the DarkLab mobile app to enable a host of features and receive firmware updates. Features include changing voltage through voice
• Ideal for the EXO and all RCA tattoo machines
• Battery can last up to 10 hours with only 1.5 hours of charge time
• Charge your battery pack in any USB-C port, including your car, airport, or from your laptop. Perfect for the traveling tattoo artist or when you attend a tradeshow
• Software and hardware work seamlessly together to provide you the best experience
• Operates from 5 volts to a maximum of 12 volts
• Only 3 buttons that allow you to check the battery, enable Bluetooth, increase and decrease the voltage, check battery life and turn off/on
• LED colour indicator lights allow you to monitor your voltage and battery life
• Good things come in small, powerful packages, LightningBolt UNI weighs only 58g (2oz)
• NOT compatible with the Microbeau Bellar
• The included charge pack has an American style plug.

The AtomX-R is designed to carry all the same great features of the original AtomX with the following additional features:

1. Added capability to sync wirelessly with the CXP19 foot switch—fewer wires for a cleaner set up.
2. Dual outputs to connect multiple machines.
3. Modernized overlay design to enhance user interface experience.

The AtomX-R is available in three exciting designs: Black/Black, RoseGold/White, and RoseGold/Black.

Features:

• Dual output for multi-machine presets
• Wireless pedal compatibility available CXP19
• Built-in neodymium magnets for a strong hold
• Jumpstart enabled for hard starting machines
• Non-volatile memory (holds presets even when power is removed)
• Momentary or maintained foot switch modes (easy one button toggle)
• Built-in short circuit protection
• Pedal override button (no need for a foot pedal if you run continuous mode)

Specifications:

• Built-in short circuit protection
• 6-amp peak inrush current, 3-amp true RMS continuous current
• Universal input 110-240vac 50/60hz
• 2-year full manufacturers warranty
• Made in the USA

No frills, just power.

The Critical MNML Power Supply offers steady voltage in its most basic, reliable form.
Its wide voltage range of 1.5-17v is adjusted at the turn of a dial. The dense, durable plastic housing of the MNML is easily-bagged and travel ready.
Featuring a single-channel machine output, foot switch connection, an anti-slip silicone base, and a 2-year warranty from one of the most trusted manufacturers in the business.

Features:

• Voltage Range: 1.5 - 17v
• Minimal design for pure functionality
• Voltage adjustments at the turn of a dial
• Built-in magnets for mounting to metal surfaces
• Easily covered for safety
• 2 year manufacturer warranty
• Made in the USA

• New-Full color TFT display with user selectable color themes and large easy to read fonts.
• New-Billet aluminum CNC machined housing
• New-Carefully tuned Capacitive touch user interface
• New for the XR-d is a built in oscilloscope for a visual approach to coil machine tuning
• New- mount design for more mounting flexibility.
• New- Jump start feature and maintained pedal modes now independently assignable to preset/output buttons
• New- Genuine high quality Amphenol 1/4Ó jacks for better power delivery and long life.
• Dual Independent Outputs
• 6 amp peak inrush current, 3 amp true RMS continuous current
• Session meter based on user set hourly rate: session mode, run time mode, or hybrid mode (new Hybrid billing mode automates user input)
• Pedal override button: No need for a foot pedal _ Precision regulated set point voltage 0-18vdc
• Built in short circuit protection _ .1 volt adjustment resolution
• Time of day Voltage presets with 2, 4, or 6 machine memory modes
• Non-volatile memory
• Universal input 90-240vac 50/60hz
• Accepts standard 1/4_ clip cord and foot pedal connections
• Volts, Amps, Speed (hz), Duty Cycle (%), and STL
• Easily bagged with typical machine or bottle baggies
• Additional mounting options available in store
• 2 year full manufacturer warranty _
• Included: XR-D power supply, Magnet mount, US power cord and switching power adapter
• Made in the USA

FK Irons’ PowerBolt+ is the new, state-of-the-art Wireless Solution, now with up to 15 hours of battery supply, intuitive voltage control for a user-friendly experience, and complete Bluetooth connectivity. Compatible with the Flux and EXO models, attaching and detaching the PowerBolt+ is easy with just a quick quarter-turn.

Tap into the future with more power thanks to the game-changing technology of the wireless Killswitch and PowerBolt+ bundle. Combined to put even more control into the palm of your hand, this bundle expands artists' capabilities and unlocks more possibilities than ever before.

Features

• Up-to 15 hours* of runtime
• Compatible with Flux and EXO
• Full Bluetooth connectivity
• Wireless Killswitch compatibility
• USB-C fast charging
• Intuitive interface
• Expand features with app
• Siri voice control
• Firmware upgrade
• Easy eGive control
• Choose voltage increment 0.1 or 0.5v
• LED intensity control

*depending on voltage

Tech Specs

• Output Voltage: 5-12V
• Increment/decrement voltage interval: 0.5 and 0.1V
• Maximum output current: 1 A
• Charger Input: USB-C
• Dimensions: 30 x 72mm
• Weight: 85g (3 oz)
• Battery Life: Up to 15 Hours

• Full TFT colour display
• OLED screen displays numbers clearly
• Nine screen colours to choose from
• Capacitive touch user interface
• Dual outputs
• Six preset voltage memory modes
• Magnetic ball bracket system can rotate 360° in any direction
• Output voltage: 1.5-18V
• Jump start voltage: 10V in 0.2s

• Replacement mount for XR and XR-D power supplies.
• Compatible with all Critical G2 Series power supplies.

MUSOTOKU Power Supply is one of the most powerful power stations you can get at this very small size. It delivers 5 Amps of power which will make your machines run smoothly, but solid and consistent.
Built in aluminium for the best durability and weight balance. It will run worldwide no matter if you are using 220V/50Hz or 110V/60Hz. Designed to ensure that your voltage is always stable even under those typical power fluctuations that plagues the conventions.

Features:

• 5 Amps consistent power (10 Amps peak)
• 2 to 16V in 0.1V steps
• Works with coil and rotary machines
• 3 Pedal Modes: Standard, Continuous Mode (foot switch free), and One-touch Pedal
• NITRO Boost for fast Startup Mode
• 4 memory presets (with auto-record)
• Amplified Sensor for Pedal: Extra sensitive foot switch sensor (12 times better) that improves performance under dirty and rusty pedals.
• Run Timer of hours-minutes. It will count session time (not needle time).
• Heavy duty connectors - the best we have found.
• Worldwide compatible (110 to 240V input) - stability tested.
• Auto Power-off
• Rear nut compatible with MUSOTOKU stands and also with photography and GoPro accessories.
• Warranty 2 years

• Full colour TFT display with user selectable colour themes and large easy to read fonts
• Optional wireless foot pedal (sold separately)
• Carefully tuned capacitive-touch user interface
• Mount design for more mounting flexibility
• Jump start feature and maintained pedal modes now independently assignable to preset/output buttons
• Session meter based on user set hourly rate: session mode, run time mode, or hybrid mode (new "Hybrid" billing mode automates user input)
• Pedal override button: No need for a foot pedal
• Time of day Dual Independent Outputs
• Easily bagged with typical machine or bottle bags
• Additional mounting options available UNIT SPECS
• Billet aluminum CNC machined housing
• Genuine high quality Amphenol 1/4" jacks for better power delivery and long life
• 4 amp peak current, 2 amp continuous
• Precision regulated set point voltage 0-1 v
• Built in short circuit protection _ 0.1 volt adjustment resolution _ Voltage presets with 2, 4, or 6 machine memory modes
• Non-volatile memory
• Universal input 90-240vac 50/60hz
• Accepts standard 1/4" clip cord and foot pedal connections
• Volts, Amps, Speed (hz), Duty Cycle(%), and STL
• 2 year full manufacturer warranty
• Included: XRR power supply, Magnet mount, and switching power adapter
• Made in the USA
  

This hard case is shockproof and waterproof with an interior that is filled with custom-cut foam to fit your MUSOTOKU power supply tightly. It is secured with lateral latches and made of black polyethylene - perfect for carrying your power supply safely and hygienically.

Technical Specifications:

• Shockproof
• Custom-cut foam interior (high density 35kg/m3)
• Securing latches
• Size: 4.1 x 6.5 x 1.7in (10.5 x 16.5 x 4.8cm)

• The EMALLA EM2 wireless battery power supply is made with an aluminium alloy frame and high quality insulating plastic
• They are compatible with all standard RCA rotary tattoo machines
• The EM2 makes it easy to adjust the voltage while tattooing
• Output short circuit protection, Input double charging protection
• Rechargeable Lithium Battery.The capacity of the battery pack is 1800mAh. 3.5 hours charge time and 6-8 hours working time at 8V
• Individually Packed. Easy to carry when you are attending tattoo conventions or traveling around the world
• Uses type-C charging interface

Includes XRR Power Supply and CXP19 Wireless Footswitch.

• Bishop Rotary and Critical’s first ever collaboration – made specifically for the Power Wand.
• These battery packs are made to be used with the RCA Power WAND, if you’ve purchased that machine separately.
• Available in two sizes – the Standard, which provides up to 10 hours of tattooing time with 1500 mAh, and the Shorty, which provides up to 5 hours of tattooing time with 800mAh.
• The batteries will work with most USB-C cords and charging bricks if you do not have the Critical Charging Dock.
• Compatible with all Critical Connect firmware and hardware – including the Critical Connect Footswitch.
• A note regarding the readout on these batteries: if you see the battery percentage fluctuating, the battery is calibrating to provide you with the most accurate battery life read-out and has no effect on the functionality and run time of your battery/machine.
• Tier 1 grade battery used to make this power pack.
• Batteries are shipped partially charged – they do not require a full charging cycle but will need to be charged upon receipt.
• After powering on, initial battery life display will take approximately 5 seconds to calibrate to an accurate read-out.
• You may notice the battery life adjust (increases or drops) between activation and pauses during sessions – this is because the battery calibration is reflecting the device’s current usage scenario.
• Note the percentage difference may be more noticeable on the Shorty batteries due to the smaller battery capacity.
• NOT COMPATIBLE WITH ORIGINAL WAND

Unleash your power. If you love the Spektra Flux, you know the PowerBolt is the brain and power supply of the machine. The detachable PowerBolt battery supply provides an extra peace of mind. Two is better than one – especially for those artists that are on the road or want a backup for when the battery is running low. Attaching and detaching the PowerBolt is easy with just a quick quarter-turn. Simply recharge as needed. Just plug into a USB-C cable. The PowerBolt provides the ultimate peace of mind in backup for busy artists.

• Battery supply for the Flux wireless tattoo machine
• Detach and attach effortlessly with 1/4 turn
• Battery life: Up to 10 hours of life with only 1.5 hours of charging time
• USB-C port: Charge your PowerBolt from any standard USB-C cord. This is perfect for the traveling artist or for trade shows
• LED Indicator : Easily check your operating voltage and battery life
• Changing Voltage: Simply decrease and increase voltage by half increments via two buttons
• Darklab App: Change voltage through voice, access tattoo time and receive firmware updates
• Manufactured in the USA

• Bishop Rotary and Critical’s first ever collaboration – made specifically for the Power Wand.
• These battery packs are made to be used with the RCA Power WAND, if you’ve purchased that machine separately.
• Available in two sizes – the Standard, which provides up to 10 hours of tattooing time with 1500 mAh, and the Shorty, which provides up to 5 hours of tattooing time with 800mAh.
• The batteries will work with most USB-C cords and charging bricks if you do not have the Critical Charging Dock.
• Compatible with all Critical Connect firmware and hardware – including the Critical Connect Footswitch.
• A note regarding the readout on these batteries: if you see the battery percentage fluctuating, the battery is calibrating to provide you with the most accurate battery life read-out and has no effect on the functionality and run time of your battery/machine.
• Tier 1 grade battery used to make this power pack.
• Batteries are shipped partially charged – they do not require a full charging cycle but will need to be charged upon receipt.
• After powering on, initial battery life display will take approximately 5 seconds to calibrate to an accurate read-out.
• You may notice the battery life adjust (increases or drops) between activation and pauses during sessions – this is because the battery calibration is reflecting the device’s current usage scenario.
• Note the percentage difference may be more noticeable on the Shorty batteries due to the smaller battery capacity.
• NOT COMPATIBLE WITH ORIGINAL WAND

The Clamp Arm is one of the most versatile accessories to attach your MUSOTOKU power supply to almost anything. The 3 free-range operational moves allow almost any position to easily get access to your MUSOTOKU, no matter how you are working.
The clamp opens up to 55 mm so it can be attached to tubes and flat surfaces. It is not recommended to be attached to very thin slots because the setting could be unstable.

• Metal alloy
• 55mm clamp opening 
• 3 free-range operational moves

Embrace the wireless revolution with a touchless tattoo power supply. With just a hover you can change your voltage, cycle through menu screens, and set a timer. Without ever touching the device, you can prevent cross-contamination and reduce the need for different devices.

The Hover makes your life easier with its functional round design including a screen at the centre, and to top it off , Bluetooth capabilities. This allows connectivity to the Darklab app which allows you to check tattoo duration time, change voltage using voice command, receive latest firmware updates, and more. Equipped with two input ports, you can connect two machines at the same time, perfect for the artists that use different tattoo machines in one sitting. If you need to stop mid tattoo, the Hover remembers the voltage you left off at, with the bank management system, you are able to save up to 9 different programmable banks. These banks are perfect to set voltages for different stages of the tattoo such as lining, colouring and shading, saving you time.

With USB-A and USB-C ports, charge mobile devices such as tablets, cellphones and Darklab battery packs. The Hover makes travel easy for those artists that are always on the go or attending trade shows.

• Ergonomic, easy to use touch free power supply.
• Prevent cross-contamination.
• Increase and decrease voltage through air gestures.
• Bluetooth compatibility allows you to connect with the Dark Lab mobile app that is compatible with Android and iOS.
• Darklab mobile app allows you to change voltage through voice, check tattoo time, and receive firmware updates.
• 9 programmable banks to save desired voltage, you can revisit them at any time.
• 2 input ports allow you to connect two different tattoo machines, perfect for artists that use multiple devices.
• Footswitch compatible.
• USB charging ports that can charge cellphones, tablets and Darklab power supplies.
• 2 – 17 Voltage Output, depends on type of needle used.
• Machine voltage readout.
• Anti-slip magnetic base.
• Set a timer on the screen to keep track of time.

• QUALITY - The Emalla Grand battery is made with an aluminium alloy frame and high-quality insulating plastic.
• STANDBY - The capacity of the battery pack is 1800mAh. 1.5 hours to be fully charged at 2A and working for 6-8 hours at 8V.
• SECURITY - Rechargeable lithium battery, type-C charging interface. Output short circuit protection, input double charging protection.
• CONVENIENCE - It is easy to adjust the voltage while tattooing and you can take it when attending tattoo conventions or traveling around the world.
• COMPATIBILITY - Suitable for Emalla Grand Tattoo Wireless Pen directly. Compatible with all standard RCA rotary tattoo machines when you connect with the RCA plug included.

Specifications

• Material: Aluminium
• Battery Type: Lithium battery
• Output Voltage: 4-12V
• Increment/Decrement Voltage Interval: 0.1V
• Charger Input: USB-C
• Battery Capacity: 1800mAh
• Charging time: 1.5 hours (100%, 2A 5V adaptor)
• Running time: Up to 10 hours (full charge)
• Jump Start Voltage: 9V, 0.2 Seconds

The Peak Solice PowerPack Battery is a pin connector screw-on battery pack designed for the Peak Solice and the Peak Solice Pro. The Solice PowerPack L comes with a removable 18500mAh battery, which can be charged using the Efest Slim K2 USB Battery Charger. This battery pack offers hours of tattooing power on a single charge. It also features a simple, clear user interface for convenient voltage adjustment and readout.

Rechargeable with the Efest Slim K2 USB Battery Charger.

Specifications:

• Color Options: Black, Pink, or Red
• Pin connector screw-on battery pack designed for the Peak Solice and the Peak Solice Pro tattoo machines
• Battery is removable
• Battery Capacity: 2000mAh
• Battery Safety: Microchip battery controller prevents short-circuit, overcharge, and battery drain
• Average Run Time: 5–8 hours (with standard settings)
• Simple, clear user interface on battery or voltage adjustments
• Jumpstart Voltage: 9v in 0.2 seconds

 

Box of 20 hygienic disposable covers specially designed for your MUSOTOKU.

Mitigates cross-contamination issues and simplifies the process of bagging thanks to the snap-in system that automatically fits on top of your power supply. Every hygienic cover also comes with a dial cap included.
Easy bagging, eye-catching and instant peace of mind.

• Material: 0.5mm recycled PET (Food Grade)
• Ingress Protection Rating: IP51
• Max Temperature: 50ºC (122ºF)

This combo includes:

• AtomX-R Power Supply - Black/Black
• CXP19 Wireless Footswitch
• Your choice of Critical cord to suit your machine

The AtomX-R is designed to carry all the same great features of the original AtomX with the following additional features:

1. Added capability to sync wirelessly with the CXP19 foot switch—fewer wires for a cleaner set up.
2. Dual outputs to connect multiple machines.
3. Modernized overlay design to enhance user interface experience.

The AtomX-R is available in three exciting designs: Black/Black, RoseGold/White, and RoseGold/Black.

Features:

• Dual output for multi-machine presets
• Wireless pedal compatibility available CXP19
• Built-in neodymium magnets for a strong hold
• Jumpstart enabled for hard starting machines
• Non-volatile memory (holds presets even when power is removed)
• Momentary or maintained foot switch modes (easy one button toggle)
• Built-in short circuit protection
• Pedal override button (no need for a foot pedal if you run continuous mode)

Specifications:

• Built-in short circuit protection
• 6-amp peak inrush current, 3-amp true RMS continuous current
• Universal input 110-240vac 50/60hz
• 2-year full manufacturers warranty
• Made in the USA

Bench top style Clamp Bracket for Critical CX-1 and CX-2 power supplies. Now you realy can take your tattooing anywhere!

Full power train combo built from quality Critical components made in the USA.

• AtomX power supply - Pink
• Atom FS footswitch
• Standard Straight RCA Cord and your choice of a second Critical cord to suit your machine

Full power train combo built from quality Critical components made in the USA.

• AtomX power supply - Black
• Atom FS footswitch
• Standard Straight RCA Cord and your choice of a second Critical cord to suit your machine

2-Bay Slim K2 USB Battery Charger with LED Indicator by Efest

Compatible with Peak Solice PowerPack Battery L

Charge up your spare batteries with the Efest Slim K2 USB Battery Charger. This charger has 2 battery ports with convenient LED indicator lights. Offering three charging modes (speeds), this charger quickly powers up your batteries, automatically shuts off when your batteries are fully charged, and auto-recharges when your battery’s voltage is less than 4.05v.

The Efest Slim K2 USB Battery Charger is made from piano springs and spring-tested for quality. It features reverse polarity and short circuit protection.

This listing is for one Efest Slim K2 USB Battery Charger. A user manual and wall adapter are included with your purchase.

Specifications:

• LED light indicator battery charger with 2 ports
• Battery slot monitors independently
• Made with piano springs; spring tested for quality
• Features a fire-resistant shell
• Three charging modes: 2A, 1A, and 0.5A
• Reverse polarity and short circuit protection
• Also protects from over-discharge and over-voltage
• Automatically shuts off when batteries are fully charged
• Auto-recharge when voltage is less than 4.05v
• Comes with user manual and wall charger cable

Power up your Peak Solice Pro or Peak Solice machine with the Peak Solice Pro battery pack. This powerhouse has a built-in rechargeable battery that delivers hours of tattooing on a single charge. You can easily charge it with the included USB-C charger cable.

Enjoy a simple, clear user interface to adjust your voltage and view your settings.

Pair this battery pack with the Radix Footswitch for even more convenient tattooing. Tattoo in continuous or momentary modes with ease using the tap of your foot.

Technical Specifications:

• Pin connector screw-on battery pack designed for the Peak Solice and Solice Pro tattoo machines
• Battery Capacity: 1500mAh
• Battery Safety: Microchip battery controller prevents short-circuit, overcharge, and battery drain
• Average Run Time: ~4–7 hours (with standard settings)
• Charge Time: 1.5 hours
• Simple, clear user interface on battery or voltage adjustments
• Jumpstart Voltage: 9v in 0.2 seconds
• PowerPack with removeable battery also available separately
• Compatible with the Radix footswitch
• Comes with USB-C charging cable

 

Introducing another addition to the LightningBolt wireless battery line — the LightningBolt 3.5mm.
This new, wireless solution is compatible with most machines that use a 3.5mm input source/connector. Now, there are even more ways to join the Wireless Revolution.

Features:

• Immerse yourself in art with a wireless tattoo battery pack that turns your tattoo machine wireless
• Perfect for the traveling tattoo artist or when you attend a tradeshow
• Battery can last up to 10 hours with only 1.5 hours of charge time
• Charge your battery pack in any USB-C port, including your car, airport, or from your laptop.
• Software and hardware work seamlessly together to provide you the best experience
• Operates from 5 volts to a maximum of 12 volts
• Only 3 buttons that allow you to check the battery, enable Bluetooth, increase and decrease the voltage, check battery life and turn off/on
• LED colour indicator lights allow you to monitor your voltage and battery life
• Good things come in small, powerful packages, LightningBolt 3.5mm weighs only 58g (2oz)

This model has been specially designed to seamlessly couple to Cheyenne machines that use the 3.5 mm jack connector, so you can enjoy the purest experience of using your Cheyenne without any conversion between the power and your motor. Additionally, this model also comes with the standard 6.35 mm jack, so it works with any other machine cord. Please note that despite having 2 outputs they are not independent (both work in parallel).
MUSOTOKU have also developed a New NITRO jumpstart profile for an improved starting experience. This new NITRO boost is now especially suited for the new Brushless motors such as those found in the Sol Nova or Sol Terra machines.

MUSOTOKU Power Supply is one of the most powerful power stations you can get at this very small size. It delivers 5 Amps of power which will make your machines run smoothly, but solid and consistent.
Built in aluminium for the best durability and weight balance.
The power supply is designed to work in any country in the world, no matter if you are using 220V/50Hz or 110V/60Hz. Its design ensures that your voltage is always stable even with the annoying fluctuations of power that plague the conventions.

• 5 Amps consistent power
• 2 Output Connectors: 3.5 mm and standard jack
• 2 to 16V in 0.1V steps
• 3 Pedal Modes: Standard, Continuous Mode (foot switch free), and One-touch Pedal
• New NITRO Boost improved for Brushless motors
• Works with coil and rotary machines
• 4 memory presets (with auto-record)
• Auto Power-off

This elegant edition is made of pure brass, treated by hand, engraved with a subtle geometrical motif, and finally coated in Epoxy 2K. The brass is aged with sandblasting and then hand burnished by our craftsman until showing a beautiful patina. It weighs twice as much as the aluminium model and looks like a solid block of gold. Every unit is decorated with a subtle pattern resulting in a unique piece of art. The shiny dial knob in golden brass adds an accent of elegant distinction.
The bactericidal properties of brass have been observed for centuries. Brass kills bacteria within a few minutes to hours of contact.

MUSOTOKU Power Supply is one of the most powerful power stations you can get at this very small size. It delivers 5 Amps of power which will make your machines run smoothly, but solid and consistent.
It will run worldwide no matter if you are using 220V/50Hz or 110V/60Hz. Designed to ensure that your voltage is always stable even under those typical power fluctuations that plagues the conventions.

Features:

• Includes a MUSOTOKU hard case
• 5 Amps consistent power (10 Amps peak)
• 2 to 16V in 0.1V steps
• Works with coil and rotary machines
• 3 Pedal Modes: Standard, Continuous Mode (foot switch free), and One-touch Pedal
• NITRO Boost for fast Startup Mode
• 4 memory presets (with auto-record)
• Amplified Sensor for Pedal: Extra sensitive foot switch sensor (12 times better) that improves performance under dirty and rusty pedals.
• Run Timer of hours-minutes. It will count session time (not needle time).
• Heavy duty connectors - the best we have found.
• Worldwide compatible (110 to 240V input) - stability tested.
• Auto Power-off
• Rear nut compatible with MUSOTOKU stands and also with photography and GoPro accessories.
• Warranty 2 years

Note: The brass dial is not compatible with the hygienic dial caps, but no worries, a standard compatible knob is included with your Brass Edition in case that you prefer comfort over the elegant look.

Important: Please be aware that all warranty issues are handled exclusively by FK Irons and this may require that the machine be returned by the buyer to FK Irons in the US. For information about this process see the FK Irons repairs page
All FK Irons machines come with a one-year manufacturer's warranty from the date of purchase. This warranty covers any manufacturer's defect. Proof of purchase is required to claim warranty.

Note: This is a portable power bank and requires an RCA or DC cord to connect to your machine.

The only power supply on the current market that allows you to use your choice of cables or connectors - wirelessly. Introducing the Airbolt, the smallest, most portable power supply that has the capabilities to keep your machine running for over 15 hours, depending on voltage. You can also connect the Airbolt to the Darklab app via Bluetooth to enable eGive capabilities. It’s time to get off the grid and experience wireless procedures.

• Up to 15 hours of battery life*
• Weighs: 3.6 oz (102g)
• 73 x 48 x 24mm
• Built-in anti-slip magnetic pad
• For extra support, several wearable and mounting accessories will be coming soon
• Easy to bag and barrier protect
• Voice control and eGive via Darklab app