Tattoo Pens

• The Elite Wireless Battery Pen is a system designed for easy tattooing.
• Will keep working for around 5 hours, depending on usage.
• The voltage, battery level and usage time is shown on the LED display.
• The voltage can be adjusted through the buttons (+) and (-) with a change of 0.1V on each press.
• Powered by a Japanese Motor.
• Recharging Time: 2 hours.
• Output Voltage: 5-12V.
• Battery Capacity: 2000mAh.
• Stroke: 3.5mm.
• Needle Protrusion: 0-4.5mm.
• Includes Wireless Battery Pen, 4 Pen Grips and a USB charging cable.

Contains everything you need for the ultimate wireless experience in-house and on the go - offered in Liner, Packer or Shader options.

• The Wand you already know and love – with a new magnetic backplate that allows the Bishop x Critical batteries to sit flush on the machine.
• When used with the Shorty battery, the Power Wand is only 4.4” and 5.2oz - the lightest set up on the market currently!
• Compatible with all Critical Connect firmware and hardware - including the Critical Connect Footswitch.
• The magnetic connection allows for a 360 degree positioning of the battery and allows for an easy, quick swap if your battery needs to be changed.
• The full set comes with 1 Power Wand, 1 Power Wand Battery Pack (1500 mAh), 1 Power Wand Shorty Battery Pack (800mAh), 1 Power Wand RCA Adapter, one 7ft RCA Cord (Grey), 1 Critical Universal Battery Dock (2 battery slots), and 1 6ft Charging Cord for the dock.
• A note regarding the readout on these batteries: if you see the battery percentage fluctuating, the battery is calibrating to provide you with the most accurate battery life read-out and has no effect on the functionality and run time of your battery/machine.
• Tier 1 grade battery used to make this power pack.
• After powering on, initial battery life display will take approximately 5 seconds to calibrate to an accurate read-out.
• You may notice the battery life adjust (increases or drops) between activation and pauses during sessions – this is because the battery calibration is reflecting the device’s current usage scenario.
• Note the percentage difference may be more noticeable on the Shorty batteries due to the smaller battery capacity.

• Compatible with most rotary brands
• Available in both RCA & 3.5mm (Cheyenne) connections
• Critical Core equals consistent and stable voltage output
• Dual charging capable dock optional
• Light weight and balanced
• Intuitive user interface
• Up to 10+ hours of tattoo time (depending on voltage use and machine)

• Length: 2.47"
• Width: 1.26"
• Weight: 2oz
• Voltage Range 4v-13v
• Colour: Black

FK Irons listened to you and created a revolutionary device that puts, you, the tattoo artist, in control of your art. The first truly wireless tattoo machine is here – the Spektra Flux. More power without any of the complicated stuff. Just a pen-style device with all the features you need.

FK Irons have created a Bluetooth enabled device with up to 10 hours of battery life with a fast charging speed of about 1.5 hours. Charge your tattoo machine from any USB-C power plug including your car, laptop, or battery pack. Know where you stand at all times and check your battery life and your voltage usage through an LED indicator. To not over complicate things, they created a user-friendly interface with only 3 buttons so you can spend more time in your art. Prioritising your comfort and safety with a lightweight, ergonomic design that packs most of the weight in the centre, reducing the strain in your arm.

It’s time to unleash your power, embrace the wireless revolution and create your masterpiece. Say goodbye to your annoying cables, rotary, coil machine - even if you’re loyal to the coil, you’ll love the Flux.

• Direct Drive: 4mm Stroke to line and pack colour better
• Lightweight Design: Only 6.3 ounces (178 grams), most of the weight is in the centre
• Dynamic Power Path Management: Always get the same amount of power
• LED Indicator: From here you can check your battery life, pair with devices via Bluetooth, and change voltage
• Changing Voltage: Decrease and increase voltage by half increments
• Detachable battery: Switch to the auxiliary PowerBolt battery.
• Battery life:  Up to 10 hours of life with only 1.5 hours of charging time
• USB-C port: Charge your wireless tattoo machine in your car, laptop, or from a battery pack
• Bluetooth capability: Pair with Darklab app
• Darklab App : Change voltage through voice, access tattoo time and receive firmware updates
• Compatible with most membrane needles
• Voltage : 5-12 Volts
• Grip: 33mm
• Handcrafted in the USA
• These PowerBolts are not compatible with the Killswitch footswitch

Unleash your power. If you love the Spektra Flux, you know the PowerBolt is the brain and power supply of the machine. The detachable PowerBolt battery supply provides an extra peace of mind. Two is better than one – especially for those artists that are on the road or want a backup for when the battery is running low. Attaching and detaching the PowerBolt is easy with just a quick quarter-turn. Simply recharge as needed. Just plug into a USB-C cable. The PowerBolt provides the ultimate peace of mind in backup for busy artists.

• Battery supply for the Flux wireless tattoo machine
• Detach and attach effortlessly with 1/4 turn
• Battery life: Up to 10 hours of life with only 1.5 hours of charging time
• USB-C port: Charge your PowerBolt from any standard USB-C cord. This is perfect for the traveling artist or for trade shows
• LED Indicator : Easily check your operating voltage and battery life
• Changing Voltage: Simply decrease and increase voltage by half increments via two buttons
• Darklab App: Change voltage through voice, access tattoo time and receive firmware updates
• Manufactured in the USA

Important: Please be aware that all warranty issues are handled exclusively by Axys and this may require that the machine be returned by the buyer to Axys in the US. For information about this process see the Axys contact and repair page
Every Axys Machine is warrantied for 1 year after the date of its sale. Warranty covers any mechanical failure due to manufacturing defects.

All those times you had to set up multiple machines…
All those times you had only one, but you worked hard to make it work anyway.
Those times are behind you now, because the Axys Valhalla does everything that every machine before it ever could, without tools or needing to stop mid-tattoo to make adjustments. It’s the first machine in the world to offer this kind of power.

This isn’t just another pen with a spinning grip. You not only adjust needle protrusion with the Valhalla’s grip, but the stroke options allow you to choose your hit. Whatever you need to do: lining, packing, coloring, blending, shading, its all there at your fingertips, 5 strokes in 1.

• 2.5mm
• 2.9mm
• 3.4mm
• 3.8mm
• 4.2mm

Features and Specs:

• Driven by a 10 watt, high-torque, Swiss made, Maxon precision motor.
• Fully American manufactured and assembled.
• Constructed of 6061-T6 aluminium, finished in Mil Spec Type II anodizing.
• American made Main Bearing.
• 5 strokes in one machine, changeable on the fly.
• Primary range of 5 volts to 14 volts (motor will start and run down to 3v).
• Lubricated for life.
• No need for maintenance.
• Uses RCA connection (**does not come with cord**).

• Crisp OLED Display and Precise Voltage
• Ergonomic Design
• Utilizes Bluetooth 5.0 Technology
• Utilizes Critical Core – created for consistent power and extreme accuracy.
• Available in both RCA and 3.5mm connections
• Compatible with most rotary brands
• Featured jumpstart assist for large needle groupings and hard starting motors
• Control the On/Off function of the batteries through two modes: Continuous and Momentary
• Compatible and wirelessly connects with the Critical Connect Foot Switch*
• Connect up to (4) Critical Connect batteries to (1) Critical Connect Foot Switch for adaptability and cordless freedom
• Dual charging capable dock (optional)
• Up to 10+ hours of tattoo time
• Voltage Range 4.5-13v
• Size: 2.4 x 1.2in
• Weight: 2oz
• USB-C Charger Cable Included
• Instruction Manual Included

• Working Voltage: 5-12V
• Connection: RCA
• Net Weight: 1.5oz (43g)
• Size: 60 x 25 x 20mm
• Battery Capacity:1000mAh
• USB Charging cable included
  

• Stroke Length: 3.5mm (Red) or 4.0mm (Green)
• Operation Voltage: 4-12
• Speed: 10400rpm
• Battery Capacity: 1800mAh
• Battery Life: 6-10 hours (depending on voltage and cartridges)
• Charging Time: 2-4 hours depends on USB-C charger and USB-C cord
• Dimensions: 33.5mm x 131mm
• Weight: 190g
• Includes USB-C charge cord

• Machine Weight: 197g
• Machine Dimensions: 142 x 32mm
• Motor: Customised Swiss motor
• Stroke: 3.5mm
• Speed: 10800rpm +/-10%
• Recharging Time: 2 hours
• Operating Voltage: 5-9V
• Battery Capacity: 1800mAh
• Needle Protrusion: 0-4.5mm
• Comes with two batteries
  

Microbeau is introducing something exciting to the cosmetic tattooing community! Ahead of the curve, they pushed the boundaries of technology to bring to market the cordless Flux S permanent makeup machine. Count on Microbeau’s quest for innovative, reliable machines designed by PMU technicians.

The Flux S interchangeable battery lasts up to 12 hours and charges with a regular USB-C cord. Optimised for PMU artists’ needs, it is elegantly designed, manageable and lightweight for an ease of use that will unleash your abilities to a whole new level of beauty.

Soon you’ll be able to control the voltage using voice commands through new features on the Darklab app, which you can download for free on your cellphone. Other updates will increase your business efficiency, as well as helping avoid cross-contamination.

• No cord, no power supply = less cross-contamination
• Very easy setup
• Switch sides effortlessly while working
• New generation of brushless motors means it’s lightweight: Only 6 ounces (170 grams)
• Dynamic Power Path Management: Consistent power for more accurate work
• Direct drive optimised for PMU: 3 mm stroke
• Most of the weight is in the centre
• User-friendly, colour-coded voltage display
• Decrease and increase voltage by half increments
• Voltage from 5 – 12 Volts
• Detachable battery: Switch to the auxiliary battery. Save when you buy both at the same time.
• Battery life: 10 - 12 hours with only 1.5 hours of charging time
• USB-C port: Charge your device in your car, laptop or airport
• Bluetooth enabled: Pair with Darklab app
• Darklab app: Change voltage through voice, access tattoo time and receive firmware updates
• Compatible with most membrane needles
• Tapered grip: 28 mm
• Handcrafted in the USA
• These PowerBolts are not compatible with the Killswitch footswitch

• Machine Weight: 196g with battery
• Machine Dimensions: 136 x 28mm
• Grip Sizes: 28mm, 32mm
• Motor: Customised Swiss motor
• Stroke: 3.5mm
• Speed: 9000rpm +/-10%
• Operating Voltage: 5-12V
• Battery Capacity: 1000mAh
• Needle Protrusion: 0-4.5mm
• Includes RCA female and male adapters, extra grip and battery charging cable

After over three years of extensive research and development, Microbeau by FK Irons is proud to announce the highly anticipated release of the Spektra Xion S. This device is the first of its kind to have been designed, engineered and beta tested in cooperation with top, reputable artists from around the world. The collaboration enabled Microbeau by FK Irons to design a machine that caters to a broad scope of micropigmentation styles while giving the artist more control over the machine and their art.

Features:

• Comfortable, ergonomic and lightweight design (4.7oz / 134g) allows for optimal manoeuvrability.
• Convenient, interchangeable stroke suits different styles of micropigmentation.
• Secure ratcheting system enables artists to lock in needle depth settings.
• Seamless, autoclavable, grip is compatible with all needles.
• One turn give dial allows for adjustment of needle tension providing artists with more options and flexibility.
• Powerful 6W MotorBolt system is the first motor specifically designed to meet the demands of micropigmentation.
• Standard 2.5mm and alternate 1.8mm stroke.
• The Grip tapers from 26mm to 19mm.

• The first pen-style machine that gives artists full control of parameters to unleash their creative vision.
• Ergonomic and lightweight design for optimal manoeuvrability.
• Convenient interchangeable strokes to suit different styles of tattooing. 3.2mm and 3.7mm Stroke Wheels included with purchase.
• Made of aircraft grade aluminium, the fully assembled machine weighs only 5.36 ounces.
• Secure ratcheting system enables artists to lock-in needle depth settings.
• Seamless, adjustable Grip is compatible with all needles.
• The grip of the machine is autoclavable. Use only steam autoclaves at temperatures no higher than 270° Fahrenheit or 132.222° Celsius.
• Incremental, one turn Give Knob dial for hard to soft adjustment of needle strike.
• Powerful 6W MotorBolt system - the first motor specifically designed to meet the demands of tattooing.
• Compatible with most power supplies on the market, the Spektra Xion is an all-in-one tool solution for all your tattooing needs.
• Machine Body and MotorBolt can be wiped externally with cold sanitation products.
• Engineered and manufactured in the USA by FK Irons.

• Crisp OLED Display and Precise Voltage
• Ergonomic Design
• Utilizes Bluetooth 5.0 Technology
• Utilizes Critical Core – created for consistent power and extreme accuracy.
• Available in both RCA and 3.5mm connections
• Compatible with most rotary brands
• Featured jumpstart assist for large needle groupings and hard starting motors
• Control the On/Off function of the batteries through two modes: Continuous and Momentary
• Compatible and wirelessly connects with the Critical Connect Foot Switch*
• Connect up to (4) Critical Connect batteries to (1) Critical Connect Foot Switch for adaptability and cordless freedom
• Dual charging capable dock (optional)
• Up to 5+ hours of tattoo time
• Voltage Range 4.5-13v
• Size: 2 x 1.2in
• Weight: 1.5oz
• USB-C Charger Cable Included
• Instruction Manual Included

• Autoclaveable
• Made of solid aluminium

The new Elite Fly V3 battery pen features a Panasonic 18500 battery and 4 channels for saving voltage settings.

Features:

• Stroke Length: 3.5mm (Red) or 4.0mm (Black)
• Operation Voltage: 4-12V
• Speed: 10400rpm
• Battery Capacity: 2040mAh
• Battery Life: 8-12 hours (depending on voltage and cartridges)
• Dimensions: 33.5mm x 125mm
• Includes charger and cable

• Material: Aluminium
• Input Voltage：DC5V/1A
• Output Voltage：6, 7, 8, 9, 11V
• Charge Mode: type-2 quick charge
• Connection: RCA
• Battery Capacity: 1200mAh
• Running Time: Up to 8 hours (full charge)
• Jump Start Volt: 9V 0.2 Seconds
• Includes USB-C charge cord

FK Irons strives to develop products to revolutionize and innovate the tattoo industry. That’s why they engineered a powerful battery that’s not only well-balanced but can be universally connected to any RCA machine on the current market. It’s the one battery to power them all.

This revolutionary power supply can be connected to any RCA machine - as long as the RCA jack isn’t blocked. Its compact design is great for easy travel, and it keeps in mind the machine’s Ergonomic Balance Point. Weighing only 2oz, the LightningBolt Uni may be small, but can still power your machines for up to 10 hours - depending on voltage. That’s power. It also has Bluetooth capabilities and can be paired with the Darklab app for ultimate wireless control. The LightningBolt Uni was designed to be the only power supply artists need and provide power for all.

• Immerse yourself in art with a wireless tattoo battery pack that turns your tattoo machine wireless
• Connect to Bluetooth and pair with the DarkLab mobile app to enable a host of features and receive firmware updates. Features include changing voltage through voice
• Ideal for the EXO and all RCA tattoo machines
• Battery can last up to 10 hours with only 1.5 hours of charge time
• Charge your battery pack in any USB-C port, including your car, airport, or from your laptop. Perfect for the traveling tattoo artist or when you attend a tradeshow
• Software and hardware work seamlessly together to provide you the best experience
• Operates from 5 volts to a maximum of 12 volts
• Only 3 buttons that allow you to check the battery, enable Bluetooth, increase and decrease the voltage, check battery life and turn off/on
• LED colour indicator lights allow you to monitor your voltage and battery life
• Good things come in small, powerful packages, LightningBolt UNI weighs only 58g (2oz)
• NOT compatible with the Microbeau Bellar
• The included charge pack has an American style plug.

Important: Please be aware that all warranty issues are handled exclusively by Axys and this may require that the machine be returned by the buyer to Axys in the US. For information about this process see the Axys contact and repair page
Every Axys Machine is warrantied for 1 year after the date of its sale. Warranty covers any mechanical failure due to manufacturing defects.

All those times you had to set up multiple machines…
All those times you had only one, but you worked hard to make it work anyway.
Those times are behind you now, because the Axys Valhalla does everything that every machine before it ever could, without tools or needing to stop mid-tattoo to make adjustments. It’s the first machine in the world to offer this kind of power.

This isn’t just another pen with a spinning grip. You not only adjust needle protrusion with the Valhalla’s grip, but the stroke options allow you to choose your hit. Whatever you need to do: lining, packing, coloring, blending, shading, its all there at your fingertips, 5 strokes in 1.

• 2.5mm
• 2.9mm
• 3.4mm
• 3.8mm
• 4.2mm

Features and Specs:

• Driven by a 10 watt, high-torque, Swiss made, Maxon precision motor.
• Fully American manufactured and assembled.
• Constructed of 6061-T6 aluminium, finished in Mil Spec Type II anodizing.
• American made Main Bearing.
• 5 strokes in one machine, changeable on the fly.
• Primary range of 5 volts to 14 volts (motor will start and run down to 3v).
• Lubricated for life.
• No need for maintenance.
• Uses RCA connection (**does not come with cord**).

FK Irons listened to you and created a revolutionary device that puts, you, the tattoo artist, in control of your art. The first truly wireless tattoo machine is here – the Spektra Flux. More power without any of the complicated stuff. Just a pen-style device with all the features you need.

FK Irons have created a Bluetooth enabled device with up to 10 hours of battery life with a fast charging speed of about 1.5 hours. Charge your tattoo machine from any USB-C power plug including your car, laptop, or battery pack. Know where you stand at all times and check your battery life and your voltage usage through an LED indicator. To not over complicate things, they created a user-friendly interface with only 3 buttons so you can spend more time in your art. Prioritising your comfort and safety with a lightweight, ergonomic design that packs most of the weight in the centre, reducing the strain in your arm.

It’s time to unleash your power, embrace the wireless revolution and create your masterpiece. Say goodbye to your annoying cables, rotary, coil machine - even if you’re loyal to the coil, you’ll love the Flux.

• Direct Drive: 4mm Stroke to line and pack colour better
• Lightweight Design: Only 6.3 ounces (178 grams), most of the weight is in the centre
• Dynamic Power Path Management: Always get the same amount of power
• LED Indicator: From here you can check your battery life, pair with devices via Bluetooth, and change voltage
• Changing Voltage: Decrease and increase voltage by half increments
• Detachable battery: Switch to the auxiliary PowerBolt battery.
• Battery life:  Up to 10 hours of life with only 1.5 hours of charging time
• USB-C port: Charge your wireless tattoo machine in your car, laptop, or from a battery pack
• Bluetooth capability: Pair with Darklab app
• Darklab App : Change voltage through voice, access tattoo time and receive firmware updates
• Compatible with most membrane needles
• Voltage : 5-12 Volts
• Grip: 33mm
• Handcrafted in the USA
• These PowerBolts are not compatible with the Killswitch footswitch

Flux Max brings you more control, more convenience and more innovation from inside out to take your skills to the max.
This is FK Irons first machine with state-of-the-art technology that learns how you like to work, from the type of ink to the tip/needle, the level of pressure you apply and setting choices. It senses, adapts and optimizes for a smoother tattooing experience.
The Flux Max features a new, built-in menu via digital display. All features and settings can be adjusted directly on your machine for maximum control.
Choose settings, apply eGive, read battery life, and select power level in either volts or hertz for improved accuracy. Reaching a new low of 4V/66HZ, select by 0.5 or 0.1 to find your sweet spot.

Features:

• Three Available Stroke Options: 3.2 mm | 4.0 mm | 4.5 mm
• Modular Versatility: The Flux Max is compatible with existing FK Irons grips, Powerbolt batteries, and Killswitch.
• Comfortable, Durable Design: 7.23 oz. (205g)
• Dynamic Power Path Management: Get reliable, consistent power levels.
• Fully Built-In Digital Menu: Easily read battery life, change settings and power level.
• Newly Designed Ergonomic Grip: 38 mm
• Responsive eGive Settings: Choose from three levels of eGive (0-3).
• Built-In Time Tracker: Track time during sessions directly on your machine.
• Changing Power: View in both Volts and Hertz for improved accuracy. Adjust power by 0.1 or 0.5.
• Bluetooth Capability: Improved wireless connectivity and range. Pair with Darklab mobile app for alternate setting controls and machine updates.
• Detachable Battery: Compatible with existing PowerBolt and PowerBolt+ batteries.
• Battery life: An average of 5-6 hours of battery life, dependent on functional preferences. Full charge in 2 hours when used with the included USB-C charging cable.
• USB-C port: For best results, use USB-C charging cord included.
• Power Supply: 4-12 Volts; 66-199 Hertz
• Engineered & manufactured in the USA

Stroke profiles dictate how hard or soft the needle strikes the skin as well as how rapidly it retracts into the tip of the cartridge. In general, the lower the percentage, the faster the hand movement can comfortably be. Higher percentages are better for slower hand movements.

Cam sets contain all four stroke profiles in one of 2.75mm, 3.6mm or 4.2mm strokes.

• 20% is a great all-rounder, but is an outstanding liner. This was the original cam and what makes a lot of people fall in love with Neuma 4. This cam feels the most like a coil. Very snappy needle strike with rapid recoil.
• 28% is great for black and grey shading, particularly for soft, smooth shades and gradations. A softer needle strike with a rapid recoil.
• The magic 33% has the slowest insertion speed which translates to the softest hit, with the same rapid recoil of the 20%. This cam is recommended for super soft grey shading and/or multi-pass colour layering with greatly reduced risk of trauma to the skin tissue. This cam is not recommended for lining.
• 40% is great for slower hand movements and/or solid color packing and blending. Great for colour realism. Softer needle strike with a slower recoil.

• Machine Weight: 197g with battery
• Machine Dimensions: 135 x 33mm
• Motor: EZ Customised External Rotor Brushless motor
• Stroke: 3.5mm
• Speed: 9000rpm +/-10%
• Recharging Time: 3.5 hours
• Run Time: Up to 450min
• Operating Voltage: 5-12V
• Battery Capacity: 1600mAh
• Needle Protrusion: 0-4.5mm
• Includes RCA female and male adapters, extra grip and USB-C battery charging cable

Untether your style without limits using the Solice Pro, Peak's first-ever wireless machine to offer a fully adjustable stroke length.  

Take advantage of hours of tattooing power with the equipped PowerPack battery and adjust your stroke on the fly. With a simple turn of the stroke adjustment knob, you can change your stroke from 2.4mm up to 4.2mm for any tattooing style.  

The Solice Pro is also designed to pair perfectly with the Radix Footswitch, which lets you tattoo in continuous and momentary modes with a stable RF technology connection.  

Peak have also made the Solice Pro battery pack as versatile as possible. It comes with two battery pack converters, which turns the PowerPack into a separate battery pack that works with any machine: 3.5mm input OR RCA input. The Peak Solice Pro machine is also compatible with the original Solice PowerPack Batteries and Peak Solice PowerPack Battery L

Key Features: 

• Lightweight pen-style modular tattoo machine 
• Aluminum construction and lightweight body 
• Net Weight: 7.2oz (with PowerPack) 
• Machine Length: 5” (with PowerPack) 
• Adjustable Stroke Length: 2.4mm–4.2mm 
• 1827 coreless motor 
• 4v up to 12v operating voltage; recommended not to exceed 10v 
• Comes equipped with 1800mAh PowerPack battery 
• Also comes with detachable RCA module for wired setup 
• Average Run Time for Battery ~4–7 hours with standard settings
  
• Chargeable by USB-C
• Pairs with our Radix Footswitch
• Equipped with1 PowerPack battery, 1 RCA Module, 2 Battery Pack Converters (3.5mm + RCA inputs), 3 O-rings, 2 Allen keys, 1 spare fly wheel, 1 USB-C charging cable, and 1 RCA cord 

Special Editions - only available in 4.0mm stroke with 2 PowerBolts

The EXO is a modular tattoo machine whose core is the same impressively powerful motor as the Flux. From the factory in the USA, the EXO unit is fitted with an RCA module for use with a traditional power supply and RCA cable or the Hover to enable eGive.

The RCA module is completely detachable with a simple quarter-turn action and can be replaced with the PowerBolt battery pack to create a wireless option. This new “modular design,” frees the artist to nimbly choose between power sources, with the option to quickly switch between:

• RCA module with RCA cable and traditional power supply
• PowerBolt battery pack for up to 10 hours of wireless tattooing

For artists who want the Flux’s power and also be ready for anything - whether using a cable is the best option in the circumstances, or you want to go wireless - the EXO is the perfect choice.

The EXO’s ergonomic design includes a larger 40mm grip to help ensure your hand isn’t clenched and overly tense. It is forward weighted, aiding the artist with downward needle pressure.

The EXO is eGive ready through the RCA module, RCA cable and Hover, or wirelessly with the Powerbolt and the Darklab app.

• FK Irons' first modular machine
• Available in 4.0mm stroke only (non-interchangeable)
• 40mm ergonomic wide grip
• Forward weighted, aiding the artist with downward needle pressure
• Powerful, 9-watt brushless motor
• Reverse polarity protection in the RCA module for motor safety
• Wired or wireless (with the Powerbolt set) options for the artist
• Ideal for lining, color packing, and solid color works
• Less passes to saturate ink, reducing skin trauma
• Weighs only 6.8 ounces, 189 grams
• eGive ready, via Hover and RCA cable or wireless Powerbolt and Darklab app
• Compatible with most standard membrane cartridges
• Note: USB-C cable included, charge plug has USA pins

• The first pen-style machine that gives artists full control of parameters to unleash their creative vision.
• Ergonomic and lightweight design for optimal manoeuvrability.
• Convenient interchangeable strokes to suit different styles of tattooing. 3.2mm and 3.7mm Stroke Wheels included with purchase.
• Made of aircraft grade aluminium, the fully assembled machine weighs only 5.36 ounces.
• Secure ratcheting system enables artists to lock-in needle depth settings.
• Seamless, adjustable Grip is compatible with all needles.
• The grip of the machine is autoclavable. Use only steam autoclaves at temperatures no higher than 270° Fahrenheit or 132.222° Celsius.
• Incremental, one turn Give Knob dial for hard to soft adjustment of needle strike.
• Powerful 6W MotorBolt system - the first motor specifically designed to meet the demands of tattooing.
• Compatible with most power supplies on the market, the Spektra Xion is an all-in-one tool solution for all your tattooing needs.
• Machine Body and MotorBolt can be wiped externally with cold sanitation products.
• Engineered and manufactured in the USA by FK Irons.

• Single Pass Power
• Powerful Custom German Brushless Motor
  
• Firmer and More Consistent Needle Hit
  
• Innovative Stabilizing System
  
• Precision Strike Technology
  
• Vibration Dampening Solution
  
• Maximum battery life of up to 15 hours
  
• Advanced LED Interface on battery
  
• Tracks Time and Hourly Rate
  
• Available in 3.5mm or 4.2mm stroke
  
• Bluetooth 5.0
  
• Compatible with the Critical Connect Foot Switch

Full Set Includes:

• Critical Torque Pen Machine
• Travel Case
• 2 x Critical Connect V3 Battery Packs
• 34mm Grip
• 40mm Grip
• RCA Adapter
• RCA Cord
• Critical Dual Battery Dock with USB-C Cord and Wall Plug

Weight:

• Battery + Pen Machine - 4.8oz
• 34mm Grip - 1.4oz
• 40mm Grip - 2.4oz

Flux Max brings you more control, more convenience and more innovation from inside out to take your skills to the max.
This is FK Irons first machine with state-of-the-art technology that learns how you like to work, from the type of ink to the tip/needle, the level of pressure you apply and setting choices. It senses, adapts and optimizes for a smoother tattooing experience.
The Flux Max features a new, built-in menu via digital display. All features and settings can be adjusted directly on your machine for maximum control.
Choose settings, apply eGive, read battery life, and select power level in either volts or hertz for improved accuracy. Reaching a new low of 4V/66HZ, select by 0.5 or 0.1 to find your sweet spot.

Features:

• Three Available Stroke Options: 3.2 mm | 4.0 mm | 4.5 mm
• Modular Versatility: The Flux Max is compatible with existing FK Irons grips, Powerbolt batteries, and Killswitch.
• Comfortable, Durable Design: 7.23 oz. (205g)
• Dynamic Power Path Management: Get reliable, consistent power levels.
• Fully Built-In Digital Menu: Easily read battery life, change settings and power level.
• Newly Designed Ergonomic Grip: 38 mm
• Responsive eGive Settings: Choose from three levels of eGive (0-3).
• Built-In Time Tracker: Track time during sessions directly on your machine.
• Changing Power: View in both Volts and Hertz for improved accuracy. Adjust power by 0.1 or 0.5.
• Bluetooth Capability: Improved wireless connectivity and range. Pair with Darklab mobile app for alternate setting controls and machine updates.
• Detachable Battery: Compatible with existing PowerBolt and PowerBolt+ batteries.
• Battery life: An average of 5-6 hours of battery life, dependent on functional preferences. Full charge in 2 hours when used with the included USB-C charging cable.
• USB-C port: For best results, use USB-C charging cord included.
• Power Supply: 4-12 Volts; 66-199 Hertz
• Engineered & manufactured in the USA

FK Irons’ PowerBolt+ is the new, state-of-the-art Wireless Solution, now with up to 15 hours of battery supply, intuitive voltage control for a user-friendly experience, and complete Bluetooth connectivity. Compatible with the Flux and EXO models, attaching and detaching the PowerBolt+ is easy with just a quick quarter-turn.

Tap into the future with more power thanks to the game-changing technology of the wireless Killswitch and PowerBolt+ bundle. Combined to put even more control into the palm of your hand, this bundle expands artists' capabilities and unlocks more possibilities than ever before.

Features

• Up-to 15 hours* of runtime
• Compatible with Flux and EXO
• Full Bluetooth connectivity
• Wireless Killswitch compatibility
• USB-C fast charging
• Intuitive interface
• Expand features with app
• Siri voice control
• Firmware upgrade
• Easy eGive control
• Choose voltage increment 0.1 or 0.5v
• LED intensity control

*depending on voltage

Tech Specs

• Output Voltage: 5-12V
• Increment/decrement voltage interval: 0.5 and 0.1V
• Maximum output current: 1 A
• Charger Input: USB-C
• Dimensions: 30 x 72mm
• Weight: 85g (3 oz)
• Battery Life: Up to 15 Hours

• Powered by a FAULHABER MOTOR.
• The Motor Bolt can be changed easily.
• The springs inside can be easily disassembled and assembled.
• Operating Voltage: 6-12V.
• Standard RCA Connection.
• Stroke: 3.5mm.
• Length: 114mm.
• One Year Limited Warranty.

Flux Max Golden Dragon Special Edition with Travel Case

Introducing the Flux Max Golden Dragon, featuring a matte black design with gold splattered accents applied by hand. This machine arrives as part of our first-ever Special Edition Travel Case bundle.
This durable, black-on-black hard case features custom-made inserts to safely store the Flux Max Golden Dragon, an extra PowerBolt II, Killswitch and charger. Available in a bundle with a Killswitch at a reduced price.

Flux Max brings you more control, more convenience and more innovation from inside out to take your skills to the max.
This is FK Irons first machine with state-of-the-art technology that learns how you like to work, from the type of ink to the tip/needle, the level of pressure you apply and setting choices. It senses, adapts and optimizes for a smoother tattooing experience.
The Flux Max features a new, built-in menu via digital display. All features and settings can be adjusted directly on your machine for maximum control.
Choose settings, apply eGive, read battery life, and select power level in either volts or hertz for improved accuracy. Reaching a new low of 4V/66HZ, select by 0.5 or 0.1 to find your sweet spot.

Features:

• Three Available Stroke Options: 3.2 mm | 4.0 mm | 4.5 mm
• Modular Versatility: The Flux Max is compatible with existing FK Irons grips, Powerbolt batteries, and Killswitch.
• Comfortable, Durable Design: 7.23 oz. (205g)
• Dynamic Power Path Management: Get reliable, consistent power levels.
• Fully Built-In Digital Menu: Easily read battery life, change settings and power level.
• Newly Designed Ergonomic Grip: 38 mm
• Responsive eGive Settings: Choose from three levels of eGive (0-3).
• Built-In Time Tracker: Track time during sessions directly on your machine.
• Changing Power: View in both Volts and Hertz for improved accuracy. Adjust power by 0.1 or 0.5.
• Bluetooth Capability: Improved wireless connectivity and range. Pair with Darklab mobile app for alternate setting controls and machine updates.
• Detachable Battery: Compatible with existing PowerBolt and PowerBolt+ batteries.
• Battery life: An average of 5-6 hours of battery life, dependent on functional preferences. Full charge in 2 hours when used with the included USB-C charging cable.
• USB-C port: For best results, use USB-C charging cord included.
• Power Supply: 4-12 Volts; 66-199 Hertz
• Engineered & manufactured in the USA

Unleash your power. The new Flux Mini unites the wireless power and capabilities of its big sister, Flux S, into a compact design that's a 1/3 smaller footprint. With a grip that measures 19mm in diameter, this slim, ergonomic device packs reliable power in our smallest footprint on the market. ​​

Meet the portable pioneer in PMU, featuring convenient interchangeable power packs, a 2.5mm stroke, and an ergonomic design for enhanced comfort. Slim in design and powerful in performance, the Flux Mini serves the industry's need for a well-balanced, wireless device with long-lasting battery life and the capabilities of earlier models, without compromises.​

Cut the cord. Maximize mobility and increase flexibility for more freedom during procedures. The Flux Mini provides mighty power with a mini price tag, crafted to fit in your back pocket.

• Slim, compact design
• Wireless power in our smallest footprint
• 2.5 mm stroke length
• Proprietary motor design
• Up to 5 hours of battery life*
• Ergonomic shape for comfort
• Enhanced mobility
• Interchangeable battery packs
• User-friendly, intuitive controls
• Accessible price point
• Includes USB-C charge cable
• ***NOT compatible with the Killswitch***

* Battery life subject to voltage, stroke, needle choice, and skin type.

These are steel springs with a passivation process done to prevent corrosion.
Use heavy duty springs only if you are having trouble stabilizing regular springs. Heavy duty is primarily for use with cartridges with very light spring tension, and regular springs for everything else.

WARNING: Using heavy duty springs with cartridges with strong spring tension can overload the motor and reduce its lifespan. Use only if necessary.

• Adjustable Stroke: 6 options (2.5mm to 4mm)
• Motor: Customised Swiss motor
• Speed: 10000rpm +/-10%
• Battery Capacity: 2000mAh
• Working Time: Approximately 5 hours
• Needle Protrusion: 0-4.5mm
• Includes battery charging cable

Neuma offer 2 different bearing arms in order to achieve a softer or harder needle strike force (hit), depending on what you prefer or what purpose you are intending.

For a softer hit, the aluminium bearing arm is recommended, and for a more powerful hit, the brass bearing arm.

Generally, the brass bearing arm is used for heavy lining, colour packing, and shading with large needle groupings, while the aluminium bearing arm is for more delicate line work, grey shading, and multiple-pass colour blending.

Available in:

• Aluminum
  
• Brass

Important: Please be aware that all warranty issues are handled exclusively by FK Irons and this may require that the machine be returned by the buyer to FK Irons in the US. For information about this process see the FK Irons repairs page
All FK Irons machines come with a one-year manufacturer's warranty from the date of purchase. This warranty covers any manufacturer's defect. Proof of purchase is required to claim warranty.

With a 28mm diameter, the Slim Grips are designed with comfort in mind, and it’s autoclavable. Made of aerospace grade aluminium, the Slim Grips are designed to work with the machines Ratchet Disk click system to control needle depth. With the natural drawing position in mind, the Slim Grip is compatible with the Flux, Flux S, Flux Max and Exo bodies.

• Aerospace grade aluminium
• 28mm diameter
• Autoclavable

Compatible with Flux, Flux S, Flux Max, FK One and Exo bodies.

Important: Please be aware that all warranty issues are handled exclusively by FK Irons and this may require that the machine be returned by the buyer to FK Irons in the US. For information about this process see the FK Irons repairs page
All FK Irons machines come with a one-year manufacturer's warranty from the date of purchase. This warranty covers any manufacturer's defect. Proof of purchase is required to claim warranty.

Microbeau International is proud to introduce the Bellar. Expertly designed in conjunction with artists and engineers to create the perfect synergy of form and functionality.
Crafted from medical grade components, and assembled and tested one at a time by our expert in-house technicians to ensure flawless performance.
Its slim and light design, weighing only 2.36 oz (67g), allows a comfortable grip regardless of the procedure’s length.
The Bellar’s precise performance make it the ideal device for artists who aim for the best possible results.
Microbeau International pioneers advancements that cater to the most competitive solutions, by creating new standards and shaping the evolution of the micropigmentation industry.

With its comfortable and lightweight design the Bellar makes for easy manoeuvrability. It features a powerful compact MotorBolt system specifically designed to meet the demands of micropigmentation. With a precise stroke length of 2.1mm, it is perfect for accurate PMU techniques. It features an adjustable autoclavable grip to regulate needle depth, plus a disposable grip option. Includes a Mini DC connector cable for optimal connectivity performance. Ideal for hair strokes, eyeliner, whip shading, scalp micropigmentation, and the creation of beauty!

Important: Please be aware that all warranty issues are handled exclusively by FK Irons and this may require that the machine be returned by the buyer to FK Irons in the US. For information about this process see the FK Irons repairs page
All FK Irons machines come with a one-year manufacturer's warranty from the date of purchase. This warranty covers any manufacturer's defect. Proof of purchase is required to claim warranty.

The 40mm ergonomic wide grip is the ideal choice for tattoo artists that prefer a larger grip, reducing the amount of wrapping required. This can also help reduce hand clenching for artists who may experience tension from narrower grips during longer sessions.

The wide grip also has a forward-weighted design, aiding in downward needle pressure. At the end of the day, it’s all about preference and using the grip that’s most comfortable for you and your style.

• Aerospace grade aluminium
• 40mm diameter
• Autoclavable

Compatible with Flux, Flux S, Flux Max, FK One and Exo bodies.

Two machines, three strokes, one package.

The EZ Nano is an all-round master with 3 strokes, distinguished by its colour (grey 4.2mm, gold 3.5mm) and the extra stroke of 2.5mm that is included in the box, allowing the tattoo artist to switch as wanted.
Light weight at only 67 grams (2.37 ounces) and with an ultra thin (20mm) design, the Nano is super comfortable and reduces hand fatigue for long tattooing sessions.

Features:

• Motor: EZ custom Swiss
• Length: 92mm
• Diameter: 20mm
• Weight: 67g (2.37oz)
• Stroke: 2.5mm, 3.5mm, 4.2mm
• Operating Voltage: 6-8.5V
• Needle Protrusion: 0-4.5mm
• Includes Nano Grey, Nano Gold and 2.5mm stroke wheel

Whether you're at the top of your career -or starting your PMU journey -the Xion Mini is the machine designed for everyone.

Microbeau's first compact, pen-style, PMU machine, designed to give artists full control of their work with no compromises. With its 2.5mm stroke, the Xion Mini is versatile and ready to take on all kinds of skin types right out of the box.

Descendant to the Xion S, the Xion Mini is powered by FK Irons' proprietary drive mechanism to provide consistent power with virtually no vibration. With a built-in click grip adjustment system that allows you to fine-tune your needle length with accuracy each time, locking your setting into place.

Powered by RCA connectivity, which comes included, or pair it with Airbolt wireless solutions for ultimate portability, eGive and Siri voice control. Or pair it with the Airbolt Mini for full control during sessions, and for a more hygienic tattooing session. Experience two times the miniature power.

The Xion Mini is a straightforward device that is suitable for all skill levels within your PMU Career. Designed to be maintenance free, allowing you to spend more time creating and less time maintaining your device.

• 2.5mm stroke
• Lightweight at only 3.1 ounces (88g)
• Compact and ergonomic design that reduces hand fatigue
• Built-in click grip adjustment system for needle depth
• Darklab proprietary motor with virtually no vibration
• eGive and Siri voice control capabilities through the Darklab app via wireless solution, the Airbolt Mini
• Compatible with standard membrane cartridges
• RCA connectivity

• Battery Capacity: 1800mAh
• Recharging Time: 2 hours
  
• Working Time: Up to 5 hours
  

• The first pen-style machine that gives artists full control of parameters to unleash their creative vision.
• Ergonomic and lightweight design for optimal manoeuvrability.
• Convenient interchangeable strokes to suit different styles of tattooing. 3.2mm and 3.7mm Stroke Wheels included with purchase.
• Made of aircraft grade aluminium, the fully assembled machine weighs only 6.56 ounces.
• Secure ratcheting system enables artists to lock-in needle depth settings.
• Seamless, adjustable 40MM Grip is compatible with all needles.
• The Grip of the machine is autoclavable. Use only steam autoclaves at temperatures no higher than 270° Fahrenheit or 132° Celsius.
• Incremental, one-turn Give Knob dial for hard to soft adjustment of needle strike.
• Powerful 6W MotorBolt system - the first motor specifically designed to meet the demands of tattooing.
• Compatible with most power supplies on the market, the Spektra Xion is an all-in-one tool solution for all your tattooing needs.
• Machine Body and MotorBolt can be wiped externally with cold sanitation products.
• Engineered and manufactured in the USA by FK Irons.

• The EMALLA EM2 wireless battery power supply is made with an aluminium alloy frame and high quality insulating plastic
• They are compatible with all standard RCA rotary tattoo machines
• The EM2 makes it easy to adjust the voltage while tattooing
• Output short circuit protection, Input double charging protection
• Rechargeable Lithium Battery.The capacity of the battery pack is 1800mAh. 3.5 hours charge time and 6-8 hours working time at 8V
• Individually Packed. Easy to carry when you are attending tattoo conventions or traveling around the world
• Uses type-C charging interface

Important: Please be aware that all warranty issues are handled exclusively by Axys and this may require that the machine be returned by the buyer to Axys in the US. For information about this process see the Axys contact and repair page
Every Axys Machine is warrantied for 1 year after the date of its sale. Warranty covers any mechanical failure due to manufacturing defects.

All those times you had to set up multiple machines…
All those times you had only one, but you worked hard to make it work anyway.
Those times are behind you now, because the Axys Valkyr gives you the edge you need to be able to do an unbelievably wide range of work. Whether you are doing world class black & grey or high end lips and eyebrows, the Valkyr will leave you with no unfulfilled desires. What’s more, this machine is also a competitive liner despite it’s flare for shading and blending.

This isn’t just another pen with a spinning grip. You not only adjust needle protrusion with the Valkyr’s grip, but the stroke options allow you to choose your hit. Whatever you need to do: lining, packing, colouring, blending, shading, its all there at your fingertips, 5 strokes in 1.

• 1.9mm
• 2.2mm
• 2.6mm
• 2.9mm
• 3.2mm

Features and Specs:

• Driven by a 4.5 watt, Swiss made, Maxon precision motor.
• Fully American manufactured and assembled.
• Constructed of 6061-T6 aluminium, finished in Mil Spec Type II anodizing.
• American made Main Bearing.
• 5 strokes in one machine, changeable on the fly.
• Primary range of 7 volts to 10.5 volts.
• Lubricated for life.
• No need for maintenance.
• 100% grip compatibility with the Valhalla.
• Uses RCA connection (**does not come with cord**).

Astral X is the evolution of the classic Astral rotary machine into the perfect upright-balanced pen-style tattoo machine.
It builds on the need for the savoir-faire of lining and colour packing to create a one-of-a-kind tattoo machine. You can adjust the needle strike from soft to hard according to your preference using the built in dial.

• RCA connection
• Aircraft aluminium.
• Stroke length: 3.5mm
• Lining: 7.5V-9V
• Colour packing and shading: 6V-8V.
• Rpm: 8000-10000rpm
• Needle Protrusion: 0-4.5mm
• Includes RCA cord

The brand new Neuma wireless tattoo machine. Highly anticipated and completely redesigned from top to bottom. Interoperable with the Critical Tattoo Supply magnetic V3 battery. Available with one or two batteries.

• redesigned transfer case featuring new, improved anti-rotation design
• mechanism cap isolates spring and mechanism from grip and cartridge
• cartridge receiver stabilizes carts from top to bottom for improved needle stabilization
• user changeable cams and springs easier than ever
• redesigned cams built to last
• designed for the use of disposable grips, in production and available in 2024
• low weight, very low centre of gravity
• very powerful 8W, 6.7mNm torque motors
• reduced vibration and sound
• all in one wireless design
• Length: 130mm
• Diameter: 33mm
• Weight: 230g
• available in 3.6mm stroke length (additional stroke lengths coming soon)
• comes with all four stroke profiles (20%, 28%, 33%, and 40%)

• Bishop Rotary and Critical’s first ever collaboration – made specifically for the Power Wand.
• These battery packs are made to be used with the RCA Power WAND, if you’ve purchased that machine separately.
• Available in two sizes – the Standard, which provides up to 10 hours of tattooing time with 1500 mAh, and the Shorty, which provides up to 5 hours of tattooing time with 800mAh.
• The batteries will work with most USB-C cords and charging bricks if you do not have the Critical Charging Dock.
• Compatible with all Critical Connect firmware and hardware – including the Critical Connect Footswitch.
• A note regarding the readout on these batteries: if you see the battery percentage fluctuating, the battery is calibrating to provide you with the most accurate battery life read-out and has no effect on the functionality and run time of your battery/machine.
• Tier 1 grade battery used to make this power pack.
• Batteries are shipped partially charged – they do not require a full charging cycle but will need to be charged upon receipt.
• After powering on, initial battery life display will take approximately 5 seconds to calibrate to an accurate read-out.
• You may notice the battery life adjust (increases or drops) between activation and pauses during sessions – this is because the battery calibration is reflecting the device’s current usage scenario.
• Note the percentage difference may be more noticeable on the Shorty batteries due to the smaller battery capacity.
• NOT COMPATIBLE WITH ORIGINAL WAND