Musotoku

Experience the power of Musotoku concentrated in a wireless battery for your tattoo machines.

The Rover R-1 is powered by easily replaceable Li-ion batteries, ensuring non-stop tattooing with spare batteries always ready to keep you focused on your work.
Simply put: when you need a recharge, swap in a fresh battery and keep working.

Design:
Musotoku have focused on what matters to you most:

• Consistent power regardless of battery percentage.
• Compact size.
• Durable connectors, and Musotoku's iconic aerospace-grade aluminium design, all with simplicity in mind.

And of course, travel hassle-free with the Rover's removable battery, approved for air travel.

Specifications:

• 5V to 12V voltage output adjustable in 0.1V
• NITRO pulse injected on every startup.
• Brushless motors: Customized start up sequence to indulge these sensitive motors.
• Power Level: Always maintained without decreasing no matter what the battery percentage is.
• Health Monitoring: >1,000 checks/sec to ensure that your tattoo machine is running smoothly.
• Size: 30 x 69mm (1.18 x 2.7in)
• Weight: 72 gr (2.5oz) with battery
• Connectors: RCA (Amphenol heavy duty)
• Display: OLED 0.49 inch
• Battery: Li-ion 1835 Flat
  

What's included:

• ROVER R-1 battery pack
• 2 x 1835-Flat Li-ion Batteries and case
• USB compatible External charger for batteries and cable
• Instructions

Experience the power of Musotoku concentrated in a wireless battery for your Cheyenne tattoo machines.

The Rover R-1 is powered by easily replaceable Li-ion batteries, ensuring non-stop tattooing with spare batteries always ready to keep you focused on your work.
Simply put: when you need a recharge, swap in a fresh battery and keep working.

Design:
Musotoku have focused on what matters to you most:

• Consistent power regardless of battery percentage.
• Compact size.
• Durable connectors, and Musotoku's iconic aerospace-grade aluminium design, all with simplicity in mind.

And of course, travel hassle-free with the Rover's removable battery, approved for air travel.

Specifications:

• 5V to 12V voltage output adjustable in 0.1V
• NITRO pulse injected on every startup.
• Brushless motors: Customized start up sequence to indulge these sensitive motors.
• Power Level: Always maintained without decreasing no matter what the battery percentage is.
• Health Monitoring: >1,000 checks/sec to ensure that your tattoo machine is running smoothly.
• Size: 30 x 69mm (1.18 x 2.7in)
• Weight: 72 gr (2.5oz) with battery
• Connectors: Minijack 3.5 (compatible with all Cheyenne machines including Thunder)
• Display: OLED 0.49 inch
• Battery: Li-ion 1835 Flat
  

What's included:

• ROVER R-1 battery pack
• 2 x 1835-Flat Li-ion Batteries and case
• USB compatible External charger for batteries and cable
• Instructions

Experience the power of Musotoku concentrated in a wireless battery for your tattoo machines.

The Rover R-1 is powered by easily replaceable Li-ion batteries, ensuring non-stop tattooing with spare batteries always ready to keep you focused on your work.
Simply put: when you need a recharge, swap in a fresh battery and keep working.

What's New - Designed for Dan Kubin

The most remarkable difference with the normal ROVER R-1 is that this model works down to 2.5V for precise works.
The second most important change has been made to the NITRO jumpstart that now it is configurable (on/off), so you can configure it to activate it or not.
The jumpstart is now also adaptive, which means that it gradually decreases the speed of the jumpstart as the machine voltage decreases. This enhances the startup feel while respecting the motor speed regime. Best of all this model is 100% compatible with tattoo machines that work from 5 to 12V. You can use it normally in your pen machines if you want.

Design:
Musotoku have focused on what matters to you most:

• Consistent power regardless of battery percentage.
• Compact size.
• Durable connectors, and Musotoku's iconic aerospace-grade aluminium design, all with simplicity in mind.

And of course, travel hassle-free with the Rover's removable battery, approved for air travel.

Specifications:

• 2.5V to 12V voltage output adjustable in 0.1V
• NITRO pulse configurable and adaptive for Dan Kubin machines.
• Power Level: Always maintained without decreasing no matter what the battery percentage is.
• Health Monitoring: >1,000 checks/sec to ensure that your tattoo machine is running smoothly.
• Size: 30 x 69mm (1.18 x 2.7in)
• Weight: 72 gr (2.5oz) with battery
• Connectors: Amphenol Armoured model, gold-plated finishing
• Display: OLED 0.49 inch
• Battery: Li-ion 1835 Flat
  

What's included:

• ROVER R-1 battery pack
• 2 x 1835-Flat Li-ion Batteries and case
• USB compatible External charger for batteries and cable
• Instructions

This is the best accessory you can buy for your ROVER R-1.

The package includes 2 INR 1835 Li-ion batteries featuring 1400 mAh each and a carrying case to store them safely.

On average, any Li-ion battery can last for 300 to 500 charge cycles. By getting spare batteries artists can enjoy the top-notch performance for longer or just the peace of mind of having more units on charge.

Specifications:

• WxH: 18 x 35mm (Flat top)
• Weight: 24g
• Voltage: 3.7V
• Wattage: 5.18Wh
• Charge: 1400mAh
• Max continuous discharge: 3A

MUSOTOKU Power Supply is one of the most powerful power stations you can get at this very small size. It delivers 5 Amps of power which will make your machines run smoothly, but solid and consistent.
Built in aluminium for the best durability and weight balance. It will run worldwide no matter if you are using 220V/50Hz or 110V/60Hz. Designed to ensure that your voltage is always stable even under those typical power fluctuations that plagues the conventions.

Features:

• 5 Amps consistent power (10 Amps peak)
• 2 to 16V in 0.1V steps
• Works with coil and rotary machines
• 3 Pedal Modes: Standard, Continuous Mode (foot switch free), and One-touch Pedal
• NITRO Boost for fast Startup Mode
• 4 memory presets (with auto-record)
• Amplified Sensor for Pedal: Extra sensitive foot switch sensor (12 times better) that improves performance under dirty and rusty pedals.
• Run Timer of hours-minutes. It will count session time (not needle time).
• Heavy duty connectors - the best we have found.
• Worldwide compatible (110 to 240V input) - stability tested.
• Auto Power-off
• Rear nut compatible with MUSOTOKU stands and also with photography and GoPro accessories.
• Warranty 2 years

New MK-2 USB-C Powered MUSOTOKU Power Supply

MUSOTOKU Power Supply is one of the most powerful power stations you can get at this very small size. It delivers 5 Amps of power which will make your machines run smoothly, but solid and consistent.
Built in aluminium for the best durability and weight balance. It will run worldwide no matter if you are using 220V/50Hz or 110V/60Hz. Designed to ensure that your voltage is always stable even under those typical power fluctuations that plagues the conventions.

Features:

• USB-C power input compatible with Laptop adapters
• It can work also with laptop batteries/powerbanks (not included)
• Dual Output: Independent output for 2 machines (2 memory presets)
• 5 Amps consistent power (10 Amps peak)
• 2 to 16V in 0.1V steps
• Works with coil and rotary machines
• 3 Pedal Modes: Standard, Continuous Mode (foot switch free), and One-touch Pedal
• NITRO Boost for fast Startup Mode
• Worldwide compatible (110 to 240V input) - stability tested.
• Auto Power-off
• Rear nut compatible with MUSOTOKU stands and also with photography and GoPro accessories.
• Warranty 2 years

This elegant edition is made of pure brass, treated by hand, engraved with a subtle geometrical motif, and finally coated in Epoxy 2K. The brass is aged with sandblasting and then hand burnished by our craftsman until showing a beautiful patina. It weighs twice as much as the aluminium model and looks like a solid block of gold. Every unit is decorated with a subtle pattern resulting in a unique piece of art. The shiny dial knob in golden brass adds an accent of elegant distinction.
The bactericidal properties of brass have been observed for centuries. Brass kills bacteria within a few minutes to hours of contact.

MUSOTOKU Power Supply is one of the most powerful power stations you can get at this very small size. It delivers 5 Amps of power which will make your machines run smoothly, but solid and consistent.
It will run worldwide no matter if you are using 220V/50Hz or 110V/60Hz. Designed to ensure that your voltage is always stable even under those typical power fluctuations that plagues the conventions.

Features:

• Includes a MUSOTOKU hard case
• 5 Amps consistent power (10 Amps peak)
• 2 to 16V in 0.1V steps
• Works with coil and rotary machines
• 3 Pedal Modes: Standard, Continuous Mode (foot switch free), and One-touch Pedal
• NITRO Boost for fast Startup Mode
• 4 memory presets (with auto-record)
• Amplified Sensor for Pedal: Extra sensitive foot switch sensor (12 times better) that improves performance under dirty and rusty pedals.
• Run Timer of hours-minutes. It will count session time (not needle time).
• Heavy duty connectors - the best we have found.
• Worldwide compatible (110 to 240V input) - stability tested.
• Auto Power-off
• Rear nut compatible with MUSOTOKU stands and also with photography and GoPro accessories.
• Warranty 2 years

The special MUSOTOKU PMU has some minor tweaks over the standard to improve the smoothness of the output even further. Designed in a muted pink finishing with an elegant Swarovski style crystal on the side and a golden knob that adds personality and the right touch of style.

MUSOTOKU Power Supply is one of the most powerful power stations you can get at this very small size. It delivers 5 Amps of power which will make your machines run smoothly, but solid and consistent.
Built in aluminium for the best durability and weight balance. It will run worldwide no matter if you are using 220V/50Hz or 110V/60Hz. Designed to ensure that your voltage is always stable even under those typical power fluctuations that plagues the conventions.

Note: The knob dial is not compatible with the hygienic dial caps that we sell, but no worries, a standard compatible knob is included with your PMU Edition in case you prefer comfort over the elegant look.

Features:

• 5 Amps consistent power (10 Amps peak)
• 2 to 16V in 0.1V steps
• Works with coil and rotary machines
• 3 Pedal Modes: Standard, Continuous Mode (foot switch free), and One-touch Pedal
• NITRO Boost for fast Startup Mode
• 4 memory presets (with auto-record)
• Amplified Sensor for Pedal: Extra sensitive foot switch sensor (12 times better) that improves performance under dirty and rusty pedals.
• Run Timer of hours-minutes. It will count session time (not needle time).
• Heavy duty connectors - the best we have found.
• Worldwide compatible (110 to 240V input) - stability tested.
• Auto Power-off
• Rear nut compatible with MUSOTOKU stands and also with photography and GoPro accessories.
• Warranty 2 years

This is the powerful MUSOTOKU but coated in glossy pink paint in 2K quality (epoxy-based with high resistance). The feeling is adorable and combative at the same time.

MUSOTOKU Power Supply is one of the most powerful power stations you can get at this very small size. It delivers 5 Amps of power which will make your machines run smoothly, but solid and consistent.
Built in aluminium for the best durability and weight balance. It will run worldwide no matter if you are using 220V/50Hz or 110V/60Hz. Designed to ensure that your voltage is always stable even under those typical power fluctuations that plagues the conventions.

Note: The brass knob dial is not compatible with the hygienic dial caps that we sell, but no worries, a standard compatible knob is included with your Pink Edition in the case that you prefer comfort over the elegant look.

Features:

• 5 Amps consistent power (10 Amps peak)
• 2 to 16V in 0.1V steps
• Works with coil and rotary machines
• 3 Pedal Modes: Standard, Continuous Mode (foot switch free), and One-touch Pedal
• NITRO Boost for fast Startup Mode
• 4 memory presets (with auto-record)
• Amplified Sensor for Pedal: Extra sensitive foot switch sensor (12 times better) that improves performance under dirty and rusty pedals.
• Run Timer of hours-minutes. It will count session time (not needle time).
• Heavy duty connectors - the best we have found.
• Worldwide compatible (110 to 240V input) - stability tested.
• Auto Power-off
• Rear nut compatible with MUSOTOKU stands and also with photography and GoPro accessories.
• Warranty 2 years

MUSOTOKU Power Supply is one of the most powerful power stations you can get at this very small size. It delivers 5 Amps of power which will make your machines run smoothly, but solid and consistent.
Built in aluminium for the best durability and weight balance. It will run worldwide no matter if you are using 220V/50Hz or 110V/60Hz. Designed to ensure that your voltage is always stable even under those typical power fluctuations that plagues the conventions.

Features:

• 5 Amps consistent power (10 Amps peak)
• 2 to 16V in 0.1V steps
• Works with coil and rotary machines
• 3 Pedal Modes: Standard, Continuous Mode (foot switch free), and One-touch Pedal
• NITRO Boost for fast Startup Mode
• 4 memory presets (with auto-record)
• Amplified Sensor for Pedal: Extra sensitive foot switch sensor (12 times better) that improves performance under dirty and rusty pedals.
• Run Timer of hours-minutes. It will count session time (not needle time).
• Heavy duty connectors - the best we have found.
• Worldwide compatible (110 to 240V input) - stability tested.
• Auto Power-off
• Rear nut compatible with MUSOTOKU stands and also with photography and GoPro accessories.
• Warranty 2 years

Box of 20 hygienic disposable covers specially designed for your MUSOTOKU.

Mitigates cross-contamination issues and simplifies the process of bagging thanks to the snap-in system that automatically fits on top of your power supply. Every hygienic cover also comes with a dial cap included.
Easy bagging, eye-catching and instant peace of mind.

• Material: 0.5mm recycled PET (Food Grade)
• Ingress Protection Rating: IP51
• Max Temperature: 50ºC (122ºF)

This is an evolution of MUSOTOKU's well known magnetic stand but with a 180º swivel. This new version is foldable, so it keeps compact and easy to carry with you on your travels. The improved screwing system now allows a fixed and more robust positioning that doesn't move at all when you use the stand on any position.
Perfectly matches MUSOTOKU Power Supply rear nut.

Where to use it:

Works great to use your power supply attached to metallic surfaces. It can be put on the top of a metallic table or also on a side thanks to the pivot mechanism

• It's foldable and easy to carry
• 3 magnets
• 30kg pull force
• 3mm steel
• Black matte

The Clamp Arm is one of the most versatile accessories to attach your MUSOTOKU power supply to almost anything. The 3 free-range operational moves allow almost any position to easily get access to your MUSOTOKU, no matter how you are working.
The clamp opens up to 55 mm so it can be attached to tubes and flat surfaces. It is not recommended to be attached to very thin slots because the setting could be unstable.

• Metal alloy
• 55mm clamp opening 
• 3 free-range operational moves

This hard case is shockproof and waterproof with an interior that is filled with custom-cut foam to fit your MUSOTOKU power supply tightly. It is secured with lateral latches and made of black polyethylene - perfect for carrying your power supply safely and hygienically.

Technical Specifications:

• Shockproof
• Custom-cut foam interior (high density 35kg/m3)
• Securing latches
• Size: 4.1 x 6.5 x 1.7in (10.5 x 16.5 x 4.8cm)

 MUSOTOKU conducted intensive research to produce the best possible tattoo cords, and the result speaks for itself.

• Available in medical grade silicone or custom knife-proof outer
• 7ft (210cm) long
• Up to 30% more power delivered to the machine thanks to the copper gauge
• The RCA connector is made of phosphor bronze that shows the best retention and flexibility achievable
• The jack is from NEUTRIK with solid cores of conductor
• Assembled with thread-locker to avoid unscrewing of the connectors, and maritime sealing for the heat-shrink tubes
• Knife-proof option includes black carry pouch