Elite Cartridges

Box of 20 cartridges.

Available in the following configurations:

• 4F-ST-35: 4 Flat, short taper, 0.35mm diameter - for large shading areas like lip shading and areola pigmentations.

Available in the following configurations:

• 1RL-LT-18: 1 Round Liner, long taper, 0.18mm diameter - finer and more accurate needle cartridge. Suitable for finest hair and fine, soft lines.
• 3RL-LT-18: 3 Round Liner, long taper, 0.18mm diameter - finer and more accurate needle cartridge. Suitable for finest hair and fine, soft lines.
• 3RL-LT-30: 3 Round Liner, long taper, 0.30mm diameter - dense and thin lines are possible. Well-suited for intense eyebrows, eyeliner and lip contour. These needles carry more colour per insertion.
• 5RL-LT-30: 5 Round Liner, long taper, 0.30mm diameter - thick and thin lines are possible, suitable for broad eyeliner and for wide lip contour. These needles carry more colour per insertion.
• 7RL-LT-30: 7 Round Liner, long taper, 0.30mm diameter - density and wide lines are possible. For broad stroked eyeliner, wide lip contour and hair density.

Box of 20 cartridges.

Available in the following configurations:

• 1RS-ST-40: 1 Round Shader, short taper, 0.40mm diameter - suitable for eyebrow hair and thin lines.
• 3RS-ST-18: 3 Round Shader, short taper, 0.18mm diameter - fine eyeliner and shader for brows. The sensation of pain is reduced to a minimum by 3-needle points. Thin skin is easy to pigment with this needle.
• 3RS-ST-25: 3 Round Shader, short taper, 0.25mm diameter - especially suitable for lip contour shading and firmer lines.
• 3RS-ST-30: 3 Round Shader, short taper, 0.30mm diameter - suitable for fine eyeliner, subtle lip shades and lip contours.
• 5RS-ST-30: 5 Round Shader, short taper, 0.30mm diameter - for lip shading, wide contours of the lips, areola pigmentations, corrections and intensive broad eyeliner.
• 7RS-ST-30: 7 Round Shader, short taper, 0.30mm diameter - used for areola pigmentation, big lip surfaces and hair thickening.

Box of 20 cartridges.

Available in the following configurations:

• 3S-ST-40: 3 Sloped Flat, short taper, 0.40mm diameter - the slanted needles are always at the same depth in the skin, so that the color stays evenly in the skin, providing more reliable holding. Suitable for eyeliner, lip and eyebrows.
• 5S-ST-40: 5 Sloped Flat, short taper, 0.40mm diameter - this needle is for the lips and for a wide upper eyeliner.

Box of 20 cartridges.

Available in the following configurations:

• 5M2-ST-30: 5 Stacked Magnum, short taper, 0.30mm diameter - a flat needle system for lip shading, areola pigmentation and hair thickening.
• 9M2-ST-30: 9 Stacked Magnum, short taper, 0.30mm diameter - used for areola pigmentation or hair thickening.

Box of 20 cartridges.

Available in the following configurations:

• 0.40 diameter
• Super extra long taper
• Commonly used for thin lines and detail work

Box of 20 cartridges.

Available in straight and curved in the following configurations:

Bugpin

• 0.30mm diameter
• Extra long taper
• Commonly used for black and grey work
• Extra long taper sharpness allows more time on the skin with less trauma

Long Taper

• 0.35mm diameter
• Long taper
• Commonly used for black and grey work
• Long taper sharpness allows more time on the skin with less trauma

Medium Taper

• 0.35mm diameter
• Medium taper
• Medium taper magnum are commonly used for working with colour
• Medium taper sharpness allows more needle contact with skin to deposit more pigment

Available in the following configurations:

Bugpin

• 0.30mm diameter
• Extra long taper
• Commonly used for thin lines and detail work

Regular Tight

• 0.35mm diameter
  
• Long taper
• 4.2 - 5.5mm solder point
• Commonly used for thin lines and detail work

• 0.35mm diameter
• Long taper
• 4.2 - 5.5mm solder point
• Commonly used for thick and classic lines
• This grouping also known as Traditional or Loose

Box of 20 cartridges.

Available in straight and curved in the following configurations:

Bugpin

• 0.30mm diameter
• Extra long taper
• Commonly used for black and grey work
• Extra long taper sharpness allows more time on the skin with less trauma

Long Taper

• 0.35mm diameter
• Long taper
• Commonly used for black and grey work
• Long taper sharpness allows more time on the skin with less trauma

Medium Taper

• 0.35mm diameter
• Medium taper
• Medium taper magnum are commonly used for working with colour
• Medium taper sharpness allows more needle contact with skin to deposit more pigment

Box of 20 cartridges.

Available in the following configurations:

Bugpin

• 0.30mm diameter
• Extra long taper
• Commonly used for thin lines and detail work

Regular Tight

• 0.35mm diameter
  
• Long taper
• 4.2 - 5.5mm solder point
• Commonly used for thin lines and detail work

• 0.35mm diameter
• Long taper
• 4.2 - 5.5mm solder point
• Commonly used for thick and classic lines
• This grouping also known as Traditional or Loose

Box of 20 cartridges.

Available in straight and curved in the following configurations:

Bugpin

• 0.30mm diameter
• Extra long taper
• Commonly used for black and grey work
• Extra long taper sharpness allows more time on the skin with less trauma

Long Taper

• 0.35mm diameter
• Long taper
• Commonly used for black and grey work
• Long taper sharpness allows more time on the skin with less trauma

Medium Taper

• 0.35mm diameter
• Medium taper
• Medium taper magnum are commonly used for working with colour
• Medium taper sharpness allows more needle contact with skin to deposit more pigment

Box of 20 cartridges.

Available in straight and curved in the following configuration:

Bugpin

• 0.30mm diameter
• Extra long taper
• Commonly used for black and grey work
• Extra long taper sharpness allows more time on the skin with less trauma

Box of 20 cartridges.

Available in straight and curved in the following configurations:

Long Taper

• 0.35mm diameter
• Long taper
• Commonly used for black and grey work
• Long taper sharpness allows more time on the skin with less trauma

Medium Taper

• 0.35mm diameter
• Medium taper
• Medium taper magnum are commonly used for working with colour
• Medium taper sharpness allows more needle contact with skin to deposit more pigment

Box of 20 cartridges.

Available in straight and curved in the following configurations:

Bugpin

• 0.30mm diameter
• Extra long taper
• Commonly used for black and grey work
• Extra long taper sharpness allows more time on the skin with less trauma

Long Taper

• 0.35mm diameter
• Long taper
• Commonly used for black and grey work
• Long taper sharpness allows more time on the skin with less trauma

Medium Taper

• 0.35mm diameter
• Medium taper
• Medium taper magnum are commonly used for working with colour
• Medium taper sharpness allows more needle contact with skin to deposit more pigment

Box of 20 cartridges.

Available in straight and curved in the following configuration:

Bugpin

• 0.30mm diameter
• Extra long taper
• Commonly used for black and grey work
• Extra long taper sharpness allows more time on the skin with less trauma

Box of 20 cartridges.

Available in the following configurations:

Superfine

• 0.25mm diameter
• Extra long taper
• Commonly used for thin lines and detail work

Bugpin

• 0.30mm diameter
• Extra long taper
• Commonly used for thin lines and detail work

Extra Tight

• 0.35 diameter
• Super extra long taper
• Commonly used for thin lines and detail work

Regular Tight

• 0.35mm diameter
• Long taper
• 4.2 - 5.5mm solder point
• Commonly used for thin lines and detail work

Box of 20 cartridges.

Available in straight and curved in the following configurations:

Long Taper

• 0.35mm diameter
• Long taper
• Commonly used for black and grey work
• Long taper sharpness allows more time on the skin with less trauma

Medium Taper

• 0.35mm diameter
• Medium taper
• Medium taper magnum are commonly used for working with colour
• Medium taper sharpness allows more needle contact with skin to deposit more pigment

Box of 20 cartridges.

Available in the following configurations:

Superfine

• 0.25mm diameter
• Extra long taper
• Commonly used for thin lines and detail work

Bugpin

• 0.30mm diameter
• Extra long taper
• Commonly used for thin lines and detail work

Extra Tight

• 0.35 diameter
• Super extra long taper
• Commonly used for thin lines and detail work

Regular Tight

• 0.35mm diameter
• Long taper
• 4.2 - 5.5mm solder point
• Commonly used for thin lines and detail work

Box of 20 cartridges.

Available in straight and curved in the following configurations:

Bugpin

• 0.30mm diameter
• Extra long taper
• Commonly used for black and grey work
• Extra long taper sharpness allows more time on the skin with less trauma

Long Taper

• 0.35mm diameter
• Long taper
• Commonly used for black and grey work
• Long taper sharpness allows more time on the skin with less trauma

Medium Taper

• 0.35mm diameter
• Medium taper
• Medium taper magnum are commonly used for working with colour
• Medium taper sharpness allows more needle contact with skin to deposit more pigment

Box of 20 cartridges.

Available in the following configurations:

Superfine

• 0.25mm diameter
• Extra long taper
• Commonly used for thin lines and detail work

Bugpin

• 0.30mm diameter
• Extra long taper
• Commonly used for thin lines and detail work

• 0.35 diameter
• Super extra long taper
• Commonly used for thin lines and detail work

• 0.35mm diameter
• Long taper
• 4.2 - 5.5mm solder point
• Commonly used for thin lines and detail work

• 0.35mm diameter
• Long taper
• 4.2 - 5.5mm solder point
• Commonly used for thick and classic lines
• This grouping also known as Traditional or Loose

Box of 20 cartridges.

Available in the following configurations:

Regular Tight

• 0.35mm diameter
  
• Long taper
• 4.2 - 5.5mm solder point
• Commonly used for thin lines and detail work

• 0.35mm diameter
• Long taper
• 4.2 - 5.5mm solder point
• Commonly used for thick and classic lines
• This grouping also known as Traditional or Loose

Box of 20 cartridges.

Available in straight and curved in the following configurations:

Bugpin

• 0.30mm diameter
• Extra long taper
• Commonly used for black and grey work
• Extra long taper sharpness allows more time on the skin with less trauma

Long Taper

• 0.35mm diameter
• Long taper
• Commonly used for black and grey work
• Long taper sharpness allows more time on the skin with less trauma

Medium Taper

• 0.35mm diameter
• Medium taper
• Medium taper magnum are commonly used for working with colour
• Medium taper sharpness allows more needle contact with skin to deposit more pigment

Box of 20 cartridges.

Available in the following configurations:

Superfine

• 0.25mm diameter
• Extra long taper
• Commonly used for thin lines and detail work

Bugpin

• 0.30mm diameter
• Extra long taper
• Commonly used for thin lines and detail work

• 0.35 diameter
• Super extra long taper
• Commonly used for thin lines and detail work

• 0.35mm diameter
• Long taper
• 4.2 - 5.5mm solder point
• Commonly used for thin lines and detail work

• 0.35mm diameter
• Long taper
• 4.2 - 5.5mm solder point
• Commonly used for thick and classic lines
• This grouping also known as Traditional or Loose

Box of 20 cartridges.

Available in the following configurations:

• 0.35mm diameter
• Medium taper
• Used for small area shading, colouring and blending
• Also used as a loose liner and for fat lines

Bugpin

• 0.30mm diameter
• Extra long taper
• Used for small area shading, colouring and blending
• Also used as a loose liner

Box of 20 cartridges.

Available in the following configurations:

• Straight Bugpin 10 Gauge (0.30mm)
• Straight 12 Gauge (0.35mm) Medium Taper
• Straight 12 Gauge (0.35mm) Long Taper
• Curved Bugpin 10 Gauge (0.30mm)
• Curved 12 Gauge (0.35mm) Medium Taper
  
• Curved 12 Gauge (0.35mm) Long Taper

Box of 20 cartridges.

Available in the following configurations:

• Bugpin 10 Gauge (0.30mm)
  
• Regular Tight 12 Gauge (0.35mm)
• Medium Tight 12 Gauge (0.35mm)

Box of 20 cartridges.

Available in the following configurations:

• Straight Bugpin 10 Gauge (0.30mm)
• Straight 12 Gauge (0.35mm) Medium Taper
• Straight 12 Gauge (0.35mm) Long Taper
• Curved Bugpin 10 Gauge (0.30mm)
• Curved 12 Gauge (0.35mm) Medium Taper
  
• Curved 12 Gauge (0.35mm) Long Taper
  
• Flat 12 Gauge (0.35mm) Long Taper

Box of 20 cartridges.

Available in the following configurations:

• Bugpin 10 Gauge (0.30mm)
  
• Regular Tight 12 Gauge (0.35mm)
• Medium Tight 12 Gauge (0.35mm)

Box of 20 cartridges.

Available in the following configurations:

• Straight Bugpin 10 Gauge (0.30mm)
• Straight 12 Gauge (0.35mm) Medium Taper
• Straight 12 Gauge (0.35mm) Long Taper
• Curved Bugpin 10 Gauge (0.30mm)
• Curved 12 Gauge (0.35mm) Medium Taper
  
• Curved 12 Gauge (0.35mm) Long Taper

Box of 20 cartridges.

Available in the following configuration:

• Curved Bugpin 10 Gauge (0.30mm)

Box of 20 cartridges.

Available in the following configurations:

• Curved 12 Gauge (0.35mm) Medium Taper
  
• Curved 12 Gauge (0.35mm) Long Taper

Box of 20 cartridges.

Available in the following configurations:

• Curved Bugpin 10 Gauge (0.30mm)
• Curved 12 Gauge (0.35mm) Medium Taper
  
• Curved 12 Gauge (0.35mm) Long Taper

Box of 20 cartridges.

Available in the following configuration:

• Curved Bugpin 10 Gauge (0.30mm)

Box of 20 cartridges.

Available in the following configurations:

• Super Fine 8 Gauge (0.25mm)
• Bugpin 10 Gauge (0.30mm)
• Extra Tight 12 Gauge (0.35mm)
• Regular Tight 12 Gauge (0.35mm)

Box of 20 cartridges.

Available in in the following configurations:

• Curved 12 Gauge (0.35mm) Medium Taper
  
• Curved 12 Gauge (0.35mm) Long Taper
  
• Flat 12 Gauge (0.35mm) Long Taper
  

Box of 20 cartridges.

Available in the following configurations:

• Super Fine 8 Gauge (0.25mm)
• Bugpin 10 Gauge (0.30mm)
• Extra Tight 12 Gauge (0.35mm)
• Regular Tight 12 Gauge (0.35mm)
• Medium Tight 12 Gauge (0.35mm)

Box of 20 cartridges.

Available in the following configurations:

• Straight Bugpin 10 Gauge (0.30mm)
• Straight 12 Gauge (0.35mm) Medium Taper
• Straight 12 Gauge (0.35mm) Long Taper
• Curved Bugpin 10 Gauge (0.30mm)
• Curved 12 Gauge (0.35mm) Medium Taper
  
• Curved 12 Gauge (0.35mm) Long Taper
  
• Flat 12 Gauge (0.35mm) Long Taper

Box of 20 cartridges.

Available in the following configurations:

• Super Fine 8 Gauge (0.25mm)
• Bugpin 10 Gauge (0.30mm)
• Extra Tight 12 Gauge (0.35mm)
• Regular Tight 12 Gauge (0.35mm)
• Medium Tight 12 Gauge (0.35mm)

Box of 20 cartridges.

Available in the following configurations:

• Regular Tight 12 Gauge (0.35mm)
  
• Medium Tight 12 Gauge (0.35mm)

Box of 20 cartridges.

Available in the following configurations:

• Straight Bugpin 10 Gauge (0.30mm)
• Straight 12 Gauge (0.35mm) Medium Taper
• Straight 12 Gauge (0.35mm) Long Taper
• Curved Bugpin 10 Gauge (0.30mm)
• Curved 12 Gauge (0.35mm) Medium Taper
  
• Curved 12 Gauge (0.35mm) Long Taper
  
• Flat 12 Gauge (0.35mm) Long Taper

Box of 20 cartridges.

Available in the following configurations:

• Super Fine 8 Gauge (0.25mm)
• Bugpin 10 Gauge (0.30mm)
• Extra Tight 12 Gauge (0.35mm)
• Regular Tight 12 Gauge (0.35mm)
• Medium Tight 12 Gauge (0.35mm)

Box of 20 cartridges.

Available in the following configurations:

• 0.35mm diameter
• Medium taper
• Used for small area shading, colouring and blending
• Also used as a loose liner and for fat lines

Bugpin

• 0.30mm diameter
• Extra long taper
• Used for small area shading, colouring and blending
• Also used as a loose liner

• 0.35mm diameter
• Super extra long taper
• Specially designed with a unique hollow centre, holds more ink and allows for optimal ink flow
• Generates crisp lines with less trauma on the skin

Box of 20 cartridges.

Available in the following configuration:

• Extra Tight 14 Gauge (0.40mm)

Box of 20 cartridges.

Available in in the following configurations:

• Straight 12 Gauge (0.35mm) Medium Taper
  
• Straight 12 Gauge (0.35mm) Long Taper
• Curved Bugpin 10 Gauge (0.30mm)
• Curved 12 Gauge (0.35mm) Medium Taper
  
• Curved 12 Gauge (0.35mm) Long Taper

Box of 20 cartridges.

Available in the following configurations:

• Bugpin 10 Gauge (0.30mm)
  
• Regular Tight 12 Gauge (0.35mm)
• Medium Tight 12 Gauge (0.35mm)

Box of 20 cartridges.

Available in in the following configurations:

• Straight 12 Gauge (0.35mm) Medium Taper
  
• Straight 12 Gauge (0.35mm) Long Taper
• Curved Bugpin 10 Gauge (0.30mm)
• Curved 12 Gauge (0.35mm) Medium Taper
  
• Curved 12 Gauge (0.35mm) Long Taper

Box of 20 cartridges.

Available in the following configurations:

• Bugpin 10 Gauge (0.30mm)
  
• Regular Tight 12 Gauge (0.35mm)
• Medium Tight 12 Gauge (0.35mm)

Box of 20 cartridges.

Available in in the following configurations:

• Straight 12 Gauge (0.35mm) Medium Taper
  
• Straight 12 Gauge (0.35mm) Long Taper
• Curved Bugpin 10 Gauge (0.30mm)
• Curved 12 Gauge (0.35mm) Medium Taper
  
• Curved 12 Gauge (0.35mm) Long Taper

Box of 20 cartridges.

Available in in the following configuration:

• Curved Bugpin 10 Gauge (0.30mm)
  

Box of 20 cartridges.

Available in the following configurations:

• Super Fine 8 Gauge (0.25mm)
• Bugpin 10 Gauge (0.30mm)
• Extra Tight 12 Gauge (0.35mm)
• Regular Tight 12 Gauge (0.35mm)

Box of 20 cartridges.

Available in in the following configurations:

• Straight 12 Gauge (0.35mm) Medium Taper
  
• Straight 12 Gauge (0.35mm) Long Taper
• Curved 12 Gauge (0.35mm) Medium Taper
  
• Curved 12 Gauge (0.35mm) Long Taper

Box of 20 cartridges.

Available in the following configurations:

• Super Fine 8 Gauge (0.25mm)
• Bugpin 10 Gauge (0.30mm)
• Extra Tight 12 Gauge (0.35mm)
• Regular Tight 12 Gauge (0.35mm)

Box of 20 cartridges.

Available in in the following configurations:

• Straight 12 Gauge (0.35mm) Medium Taper
  
• Straight 12 Gauge (0.35mm) Long Taper
• Curved Bugpin 10 Gauge (0.30mm)
• Curved 12 Gauge (0.35mm) Medium Taper
  
• Curved 12 Gauge (0.35mm) Long Taper

Box of 20 cartridges.

Available in the following configurations:

• Super Fine 8 Gauge (0.25mm)
• Bugpin 10 Gauge (0.30mm)
• Extra Tight 12 Gauge (0.35mm)
• Regular Tight 12 Gauge (0.35mm)
• Medium Tight 12 Gauge (0.35mm)

Box of 20 cartridges.

Available in the following configurations:

• Regular Tight 12 Gauge (0.35mm)
  
• Medium Tight 12 Gauge (0.35mm)